SA cement based coating for EPS outside cornice - SA802
| Place of Origin: Shanghai China (Mainland) | Brand Name: SA | Model Number: SA802 | Usage: Joint Mortar,Building Coating |
| Type: Cement Mortar | Main Raw Material: Cements, polymers | State: Powder Coating | Color: Mainly grey |
SA Expanded Polystyrene Decorative Cornice Coating Mortar
Weight: 25kg
Shelf life and storage: 6 months after manufacturing date in dry ventilated place
Standard: JG149-2003
Field of application
The function of this product is to protect the EPS corince and fix the mesh
Recommended thickness
3 to 5mm
Mix ratio with water
5.5 liter/ 25 kg powder,0.22 l/ kg powder
Product specification
Items | Data | Test Method | |
Pull-off strength (with EPS cornice) | Original | ≥ 0.10 Mpa (EPS damaged) | JG 149 |
| Water resistant | ≥ 0.10 Mpa (EPS damaged) | ||
| Freeze - thaw resistant | ≥ 0.10 Mpa (EPS damaged) | ||
Flexibility property | Compressive strength/flexural % (cement base) | ≤ 3.0 | |
| Cracking strain % (non cement base ) | ≥ 1.5 | ||
Processing/working time | 1.5~4.0 h | ||
- Stucco craft painting
- Natural stone effect coating
Remarks:
1)Only mix with water, no other addition
2)The mixture must be used up in 2h
3)Avoid high temperature and freezing
4)Avoid strong wind during application
5)Avoid rain during application
1)May cause serious damage to eyes
2)May be sensitive to skin in case of contact. lrritable for eyes, respiratory system and skin
3)Keep out of the reach of children
4)Avoid breathing the dust
5)In case of contact with eyes,rinse eyes immediately with plenty of water and consult a doctor
| Packaging Detail:Supplied 25 bag paper bag |
| Delivery Detail:3 days |
Related Product for SA cement based coating for EPS outside cornice
Cementitious EPS profile hard coating
- Rock hard coating & adhesive- Water resistant
- Tough,stable surface
- Goes on Smooth and Easy
- Fast set times
exterior self levelling compound self levelling mortar
1:Free-flowing, self-leveling and pumpable2:Long heal times for extended workability
3:Economical and easy to use
Glass tile glue
- Very strong bond strength- Long working time for difficult layouts
- For layer of thicknesses of 4 to 5mm
- Economical
Flexible Tile Adhesive for External Insulation System Shanghai
flexible,non-slip,water-resistant&frost-resistant,especially suitable for fixing fully vitrified and porcelain tiles,easy to use
SA Special Interface Treating Agent for Autoclaved Aerated Concrete
1)Improve combination of mortar and wall2)Reduce water absorbency of foam concrete
3)Avoid water from filtering into concrete
SA Glass Tile Mortar
- Very strong bond strength- For layer thicknesses of 4 to 5 mm
- High stability
- Economical
- Water and frost-resistant
SA Dry Mix Cement -based Interior and Exterior Ceramic Tile Grout
1)fill jonts from 1/8" to 1/3"2)polymer-modified-just add water
3)creamy,easy to spread
4)colors to complement today's tile
SA Dry-mixed High Water Retentive Masonry Mortar for Aerated Concrete Blocks
AAC joint mortar1)mineral2)fulfils the mortar requirement for subsequent thin plastering
3)weatherproof,strong friction bond
SA Polymer Based Styro Expanded Polystyrene Foam Coating
1)Dry,bagged product2)Mix only what you need
3)Lower cement-to-polymer ratio
4)Smooth,creamy consistency
5)speeds mesh e
Cement self-leveling for construction material
1:Free-flowing, self-leveling and pumpable2:Long heal times for extended workability
3:Economical and easy to use
SA Adhesive for Light Weight Foam-Concrete Blocks
1)Good workability2)Weatherproof, frost-resistant
3)No rapid loss of water,strong friction bond
4)Easy correction of brick
SA Outdoor Tile Adhesive
ceramic adhesive mortar1)Water and frost resistant
2)No additives required
3)Easy application
4)Long lasting durability