round bruh copper/ steel/ stainless steel/brass wire stainless steel shaft end brush - XS-037-3

steel wire type steel wire plating type

stainless steel type brass type

~Wire End Brushes with shaft~

A end brush for chipping of general steels,stainless steels etc.

Most suitable for chipping of the work.

Please choose the best one according to the hardness and work.

It also can be used for cleaning of the surface of works.

diameter:10,13,15,20,25,30mm

shaft size:6mm

Crimped End Brushes Specifications&Advantages

• Available in two configurations
• For use on die grinders to clean and debur a recessed area or the inside diameter of a tube or pipe
• Crimped wire end brushes for more aggressive cutting
• Crimped wire end brushes for lighter brushing action and contoured surfaces
• Wire End Brushes for use on die grinders to clean and debur a recessed area or the inside diameter of a tube or pipe.

• Powder-coated and color-coded hubs won't rust, preventing cross-contamination for the end-user.

Applying of industrial brushes

1:Industrial brushes used in the surface- treatment of metal, mainly aspects as below:
♦ Rough machining of surface(polish, pull rough, rust clearance)
♦ Clear of surface (dirt reduce, oil relieve)
♦ Finishing of surface(Mill, gloss marking ,polish)

2: Selection for applying of industrial brushes
First of all, the choice of industrial brushes would be according with the performance of the material which will be done, e.g: smooth finish and hardness of material, etc…selecting suitable steel wire of brushes; choosing correct shape of brushes according to the different condition; to calculate the specification and rounds of the brushes basis on technological process Normally, same diameter of the wire, the more short ,the mill force is more strong, the more long, the more less, and diameter of whole brushes(around one) more bigger, and result is much better

3 :The solution of using brushes if the effective is not very satisfied.

♦ If the effective of using of brushes is too weak

--Choosing a bigger diameter on or rising the speed of brushes(no more than Max. speed)
--Reducing the length of wire
--Selected a bigger wire brushes

♦If the effective of using of brushes is too strong
--Choosing a smaller diameter on or reduce the speed of brushes
--To longer the length of wire
--Selected a smaller wire brushes

♦Surface is to rough
--Choosing a bigger diameter on or rising the speed of brushes(no more than Max. speed)
--Reducing the length of wire
--Selected a bigger wire brushes

♦Surface is to gloss
--Choosing a smaller diameter on or reduce the speed of brushes.
--To longer the length of wire
--Selected a smaller wire brushes

Available Size