35 mm plastic Ceramic Cartridge - N35H

1.Plastic Cearmic Cartridge, 2.35 mm diameter, 3.plastic body ceramic cartridges, 4.with foot base - details see: https://www.buildingsupplieshub.com/35-mm-plastic-ceramic-cartridge-10063309

Type: Faucet Cartridges	Place of Origin: Zhejiang China (Mainland)	Brand Name: kone	Model Number: N35H
Material: Ceramic	color: any color	Certificate: ACS

35 mm plastic Ceramic Cartridge

Max.temperature: 90°C	Gland nut torque: 8-12N.m(advice 10N.m)
Max.turn angle:100°
Max.opening angle:23º	Lever break torque: ≥15N.m
Lever torque test: 0.2—0.3N.m(static pressure at zero)
Burst test pressure: water static pressure Max.3.5MPa
Air pressure test: 0.8MPa(one by one tested by 100%)

Flow rate test

According to the (GB18145-2003), dynamic pressure under 0.3, without any condition, flow rate of bathtub should be ≥0.33 L/S; basin should be ≥0.20L/S. (Detail specification of products, please refer to the below table)
Flow rate change under different pressure:

(Bar) Pressure (Bar)	0.5	1	1.5	2	2.5	3	3.5	4
(L/min) Average flow rate(L/min)	12.7	15.0	18.2	21.0	23.3	25.4	27.3	29.2

Burst test pressure

Sealing test

Test Item	Outlet status	pressure (MPa)	time(s)	Technical Requirements (according to GB18145-2003)	Test Conclusion
Inlet	Open	1.6±0.05	60±5	No leakage	Qualified
		0.4±0.02
Outlet	Close	1.6±0.05	60±5	No leakage	Qualified
		0.4±0.02

Cold /Hot water cycle test:

Put cartridge into -20±2°C and 95±2°C environment in turn. Every 12 hours as a period, do three times cold and hot water test continually; after that, put cartridge into 80±5°C water and mild water in turn in every 40 seconds, do 450 cycles continually. No leakage after cold/hot water cycle testing.

Life cycle testing:

According to the EN817,GB18145-2003 standard test more than 70,000 cycles (hot water temperature: 65±2o,cold water temperature: ≤30o,pressure: 0.3±0.05Mpa); According to the ASME A112.18.1-2005 standard test mor4 than 500,000 cycles (hot water temperature: 66±6o,cold water temperature: 10±6o,pressure: 0.3±0.05Mpa). Technical data(according to ASME A112.18.1-2005) as the following table.

Packaging Detail:50pcs/inner box , 300 pcs /ctn

Delivery Detail:25-30 DAYS