Touch Reminder for Blind People - WT06i0450

Touch Reminder for Blind People

ProductFeatures
1.32 ~ 320Kbps MP3 audio format player, beautiful sound;
2.voice update through U-disk audio files copied to the internal FLASH;
3.support for plug-in maximum 64M SPI Flash as the carrier of the storage of voice;
4.the use of touch trigger, you can replace the traditional touch switches;
5.wide voltage range of AC 100 ~ 250V
6.relay dry contacts which can be accessed below 600W resistive load
7.relay disconnect delay time can be set by iSound.mp3 file (10S ~ 2540S)
8.stable performance, external active speakers (requires greater audio output power)

Product Application
This product is not a simple voice prompts, but with a conventional touch switches and power control functions voice prompts. It can also play voice prompts at the same time control the power of external device to open and close. Conventional touch, turn off delay time to be adjusted freely by the customer, with a touch switch, power control (built-in relays), voice reminders, the freedom to control delay time, sensitivity and other characteristics. This product is suitable for staircase lights, channel lighting control, a welcome gate and other occasions.

Product Specifications
Operating voltage: AC 100 ~ 250V/50 ~ 60Hz
Standby current: ≤ 3.5mA
Play voice power: ≤ 1W
Load: ≤ 600W (resistive load)
FLASH Capacity: standard 16Mbit FLASH (can be customized 4 ~~64Mbit)
Inductive way: human touch
The use of the environment: indoor use only, relative humidity less than 95%
Part Size outside of wall: 86mm * 86mm * 28mm
Part Size inside of wall : 86mm * 86mm * 15mm