K11 Flexible Waterproof Slurry - K11

1.The coating can restrain bacterial growth and prevent humidity, 2.Can be constructed on rough base, 3.Nontoxic and harmless - details see: https://www.buildingsupplieshub.com/k11-flexible-waterproof-slurry-10100464
Type: Other Waterproofing MaterialsPlace of Origin: Guangdong China (Mainland)Brand Name: EloktModel Number: K11
Color: White,GreyShelf Life: 12 MonthsCertificate: ISOBonding strength: 0.8~1.0 Mpa
Breaking strength: More than 6 MpaCompressive strength: More than 18 Mpa  
K11 Flexible Waterproof Slurry
contact supplier for K11 Flexible Waterproof Slurry


K11 Flexible Waterproof Slurry

Product Introduction

It is based on proprietary technology of ELOKT and uses the mechanism of cementitious

capillary crystalline materials and concrete, and combines with the adhesion, water holding

capacity and flexibility of polymer emulsion and concrete, cement mortar base course, which

has very good waterproofness.

Scope of application

*Cement concrete structure of indoor and outdoor, brick wall and light brick structure.

*Floor, kitchen, bathroom, ground and garage

*Edible pool, swimming pool, fishpond and sewage treatment pond

*Daub to the substrate before paving the stone, tile, wood floor, wallpaper and gypsum board.

Features

1.The coating can restrain bacterial growth and prevent humidity

2.Can be constructed on rough base

3.Nontoxic and harmless, can be used in drinking pool and fishpond

4.Can directly stick with tile or make level

5.Can be constructed on moist base

6.Can cover tiny crack and resist slight shaking

Construction Technology

Base course: The base course must be solid, clean, flat, and humid, no greasy dirt or dust; when there is a flaw or crack, it must be repaired by using cement mortar; and external corners should be made into circular arcs by spatula.

Stir and mix: Pour the additive into container with a certain ratio then pour the powder into the additive and stir adequately till they become mucilage without granules; to prevent layering and sediment, stir intermittently during use.

Mixing ratio: liquid (additive): powder = 1:2.77 (weight ratio)

Construction: Directly use brush or brush roll to brushing the base course evenly, and make sure that there are no missed areas; brush 1 layer for damp proof, and 2-3 layers for waterproof. Brush the second layer when the first layer is not sticky (1-2h), and the direction shall be vertical.

Coating protection: After finish the slurry constructing, the coating shall be protected including pedestrians prohibited; rain erosion, insolation or sharp objects etc, it does not need special protection after the coating has been dry.

Coating maintenance: After construction have been done for 24h, use wet cloth to cover or spray with water to maintain the coating for 2-3days; if there’s high humidity or airless, drying time of coating will be longer, conversely it will shorter. Use mechanical ventilation to speeding if necessary for the project schedule.

Construction temperature: Between 5-40°C.

Technical indexes

Executive standard:JC/T984-2011

Item

Index

Setting time(a)

Initial set/min≥

45

Final set/h

24

Resistance osmotic pressure(b)/MPa

Coating specimen≥7d0.4

Mortar specimen≥

7d0.8
28d1.5
Compressive strength /MPa

18.0
Breaking strength/MPa

6.0
Flexibility (lateral deformation)/mm

1.0

Bonding strength/MPa

7d ≥

0.8

28d ≥

1.0

a. Setting time can be adjusted according to user needs and seasonal change.

b. Measuring the resistance osmotic pressure of coating specimen when the thickness is less than 5 mm; measuring the resistance osmotic pressure of mortar specimen when the thickness is more than 5 mm; measuring according to the product purpose.

Reference dosage

1.5-2.0kg/ m2when use in waterproofing and moisture proofing with no hydrostatic pressure which the thickness is about 1mm.

Each set of 5 kg can besmear to brush2.5~3.3 m2
Each set of 20 kg can besmear to brush10~14 m2
Each set of 34 kg can besmear to brush17~23 m2

2.5-4.0kg/ m2when use in significant waterproofing which the thickness is about 2mm.

Each set of 5 kg can besmear to brush1.3~2.0 m2
Each set of 20 kg can besmear to brush 5~8 m2
Each set of 34 kg can besmear to brush9~14m2

Notices

Do not use in following situations:

1)When buildings shake, shift or shrink a lot;

2)The sealing of the expansion joint, deformation joint, settlement joint, post-cast strip or wall pipe.

Safety matters

This product is alkaline so that should be avoided contacting with skin for a long time and powder inhalation. Meantime, protect your eyes from contacting powder and if contact occurs, rinse with water immediately and go to hospital as soon as possible. Non-toxic and harmless, this is an environmental product.

Packaging, appearance and storage

Packing: 5kg/set, 20kg/set, 34kg/set

Appearance: additive: milk white powder: gray

Store in a cool dry place; quality guarantee period: 12 months.

Packaging Detail:Packing: 5kg/set, 20kg/set, 34kg/set
Delivery Detail:10 days after receive the deposit

Related Product for K11 Flexible Waterproof Slurry