Waterproof mortar additive/Powder Silicone Water Repellent Sodium Methyl Siliconate RJ-WP1-1 - RJ-WP1-1

Powder Silicone Water Repellent RJ-WP1-1 is a new type waterproof material for building with good permeability and crystallinity - details see: https://www.buildingsupplieshub.com/waterproof-mortar-additive-powder-silicone-water-repellent-sodium-methyl-siliconate-rj-wp1-1-10100172
Type: Other Waterproofing MaterialsPlace of Origin: Zhejiang China (Mainland)Brand Name: RuichemModel Number: RJ-WP1-1
Waterproof mortar additive/Powder Silicone Water Repellent Sodium Methyl Siliconate RJ-WP1-1
contact supplier for Waterproof mortar additive/Powder Silicone Water Repellent Sodium Methyl Siliconate RJ-WP1-1


Description

Chemical name:Sodium MethylSiliconate

Powder Silicone Water Repellent Sodium Methyl Siliconate RJ-WP1-1is a new type of rigid waterproof material for building with good permeability and crystallinity. Crosslinking reaction happens between Si-OH in themolecularstructureand Si-OH in silicate materials under the condition of moisture.So-called “anti-capillary effect” occurs to form an excellent waterpoof layer.At the same time, it will have the effect of microdilatancy and increasing the compactness.

Technical Index

PropertySpecification
Appearance:White powder
Solid Content:98%
Silicone Content68%
PH12-13
Flammabilityincombustible

Application

  1. PowderSodium MethylSiliconate RJ-WP1-1 is widely used in the water-resistance and moisture-resistance of roof, interior & exterior wall suiface,floor,washroom,kitchen,basement and warehouse
  2. Anti-corrosion and anti-permeability forreinforcedconcretestructure.
  3. Used to reduce water corrosion and prevent the weathering in air-raid shelters underground like: culvert, bridge, dyke, tunnel, large hydropower station and water diversion project.
  4. Used in all kinds of pools like:swimming pool,clear water reservoir,cesspit,water tower etc.
  5. Used in the impregnation of inorganic aggregates like:Perlite board,roof bricks,cement bricks,asbestos, inorganic fabric and thermal insulation material etc,making it water-resistant and moisture-resistant
  6. Used in water-soluble architectural coatings to pretend material from moisture,pollution and aging. It also can protect the color.
  7. Used as additive in latex paint,sodium silicate and 107paint, making it water-resistant and keeping stable bond strength.
  8. Used in petroleum drilling,adjusting the mud viscosity and density, preventing the well drilling from subside, improving the drilling rate.

Product information

Usage

  1. Waterproof mortar construction:Clean the silt,impurity and oil contamination etc on the surface of base material; Keep thecement-sandratioat 1:2.5-3, water cement ratio≤0.5.The usage amount of poder silicone water repellent is 0.4% of the cement.;Stir the poder silicone water repellent with cementand sand well first then add water to mix uniformly.Smear the waterproof layer in two layers(10mm for each layer): Smear the bottom layer with plain mortar for 1mm, then smear the waterproof mortar layer,compact it when starting solidifyfing,use wood float to rub it into pitted surface;smoothingly compact after smear the second waterproof mortar layer(it must be rubbed into pitted surface if decorating construction is needed)
  2. Waterproof concrete construction:The usage amount of poder silicone water repellent is 0.4%-0.5% of the cement, mixed evenly to prepare concrete, used as common concrete construction. Stir the poder silicone water repellent with cement and sand well first then add water to mix uniformly.
  3. Spray and anti-permeate construction:dilute the poder water repellent with clear water in a rate of 1:50, then spray it to the surface of inorganic construction material like:cement surface,brick,tile,gypsum board etc, with excellent waterproofing effect.
  4. Waterproofing cement ratio:Stir the poder silicone water repellent with cement in the rate of 0.5%.

Attention

  1. This product can be used together with nitrites antifreezing agent in winter.
  2. This product is a generic chemicals.Construction workers should be careful in the storage and use, not to splash to the face, especially not be splashed into eyes.Rinse immediately with plenty clear water or ask the doctor to deal with. Wear gloves, protective glasses, put on clothes when operating.Avoid contacting with skin

Packing

25kg bags

Storage

Sealed storage under -30-90°Ctemperature. Avoid water or moisture and avoid package damage.

Shelf life

Shelf life:5 years.

Packaging Detail:25kg bags
Delivery Detail:15 days

Related Product for Waterproof mortar additive/Powder Silicone Water Repellent Sodium Methyl Siliconate RJ-WP1-1