Waterproof APP Modified Bitumen Membrane - BITUMODE DELTA - P

1. Type: Waterproof Membrane, 2. Model: DELTA - P, 3. Reinforcement: Polyester, 4. Surface Finish: PE, 5. Thickness: 3 or 4 mm - details see: https://www.buildingsupplieshub.com/waterproof-app-modified-bitumen-membrane-10100363

Type: Waterproof Membrane	Place of Origin: Egypt	Brand Name: BITUMODE	Model Number: BITUMODE DELTA - P
Modification: APP	Cold Flexibility: 0 Co	Reinforcement: Polyester	Thickness: 3 or 4 mm + 5%
Weight: 4 & 4.5 & 5 kg/m2	Surface Finish: PE, Sand, AL, Slates with different colors (Grey, Red, Green, White)	Heat Resistance: 110 Co	Usage: Waterproofing of toilets & wet area inside buildings

Waterproof APP Modified Bitumen Membrane

contact supplier for Waterproof APP Modified Bitumen Membrane

BITUMODE is a torch-applied APP modified bituminous membrane that is reinforced with either fiberglass, polyester, or fiberglass /polyester combinations strategically located in the modified bitumen compound to incorporate additional performance characteristics into the membrane.

The net results are modified bitumen membranes with superior weatherability; strong and stable, yet accommodating to mechanical and thermal loads.

Available Range

The standard range of BITUMODE products is shown in the accompanying schedule. The typical thickness available are 3 and 4 mm. surface finishes can be polyethylene film on both sides; one side polyethylene and one sand; or granule finish on upper surface . The nominal length of each roll is 10 meters and the nominal width is 1 meter. Custom specifications can be designed based on the need of the clients.

Composition of the Product

1-Polyethylene, fine sand, or granules2-Compound3-Reinforcement4-Compound5-Polyethylene film

BITUMODE DELTA - P

BITUMODE DELTA - P is high quality torch applied waterproofing membrane, modified by APP and APAO with P Reinforcement

Specification

Type	Waterproof Membrane
Place of Origin	Egypt
Brand Name	BITUMODE
Model Number	BITUMODE DELTA - P
Modification	APP
Cold Flexibility	0 C^o
Reinforcement	Polyester
Thickness	3 or 4 mm + 5%
Heat Resistance	110 C^o
Weight	4 & 4.5 & 5 kg/m2
Surface Finish	PE, Sand, AL, Slates with different colors (Grey, Red, Green, White)
Usage	Waterproofing of toilets & wet area inside buildings
Min. Order Quantity	500 Roll/Rolls
Port	Any Egyptian Port
Payment Terms	L/C T/T
Production Capacity	60,000.00 Square Meter/Square Meters / Day
Packaging Details	Vertically Stacked on Wooden Pallets & Shrink Wrapped
Delivery Time	Fastest Delivery Time to Worldwide Destinations