toughened glass - GVG

toughened glass

Full Tempered Glass Property

The intensity of tempered glass is 3-4 times of ordinary glass and the surface stress is more than 90MPa; when it is destroyed by external force the stress is instantaneously released subject to the reaction of the internal tensile stress, so the whole piece of glass completely becomes pellets with no sharp angles, which will greatly reduce the possibility of the body injury; and the Full Tempered Glass can resist the acute change of extreme cold and hot temperature.(The 5mm tempered glass approximately may bear 200 degrees temperature changes.)

Half Tempered Glass Property

The intensity of half tempered glass is 2-3 times of ordinary glass with the surface stress between 24 and 69MPa; when it was destroyed by external force, the crack starts to extend to side from where it is destroyed but most of parts of glass still keep in frame that avoids or reduces body injury; Half Tempered Glass is also characterized by advantages of the ordinary plate glass and the Tempered Glass, but with higher intensity than the ordinary plate glass and keeping the flatness between both of them without spontaneous explosion.

Application of tempered glass

Buildings need safety glass; windows and other parts of façade; glass bar and elevator; windows for vehicles and ships, Desks and displaying frame, inside decoration and furniture that easily breaks.

Features:

High flat: The greatest feature of Tamglass is the high degrees of flat. The tamglass production line brought from Finland can satisfy demands of coated glass, laminated glass, mould, furniture, electronic product, and skyline etc.Especially plat degree of semi tempered glass is very close to raw glass which can achieve plane effect.

Curved tempered glass:

Heated to levels just slightly below the softening temperature according to certain curved diameter , then immediately exposed to quick cold air that brings it back to low temperature

Product application:

The products are widely used in the exterior decoration projects of high-end buildings, such as, sunshade lighting roof, Sightseeing elevators and revolving restaurants, etc.

Gevergel (Foshan) engineering glass co.Ltd. (GVG) is a famous sole foreign investment enterprise, providing service for glass processing and engineering project which have good reputation in China.

Adopting traditional European glass techniques, gathering experts in glazing line and geting professional ideas from foreign consultants, GVG is capable of providing all-around service of glass processing and glazing engineering.

GVG introduces in advanced managing mode which advocates enterprise culture of people-centered, constructing company area network, implementing computerized management.