Tile fixing adhesive - SA812

- water- and frost-resistant, - easy to apply, - high stability, - for layer thicknesses of 2 to 10 mm, - cheaper - details see: https://www.buildingsupplieshub.com/tile-fixing-adhesive-10097644
Type: Tile AccessoriesPlace of Origin: Shanghai China (Mainland)Brand Name: SAModel Number: SA812
Tile Accessory Type: ceramic tile adhesiveQuality System Standard: ISO 9001-2008Appearance: Grey powderApplication: Tiling floor and wall
Main ingredient: Cement, sand, cellulosics, redispersible latex powders   
Tile fixing adhesive
contact supplier for Tile fixing adhesive


Shunan polymer cement ceramic tile adhesive
A grey cement based adhesive should be selected for most floor tiling with porcelain or ceramic tiles, or with tiles that will grouted with dark colours on a wall ,suitable for fixing any kind of ceramic tile to floors or walls in interiors or exteriors.

This type of tile adhesive or glue is used for general tiling on solid concrete or masonry walls and floors. This tile adhesive or glue is generally cheaper than other types of tile adhesive as it is a basic cement based non flexible adhesive. This adhesive should not be used on cracked cement floors or where some movement is expected. It is supplied dry and is mixed with water before being applied

Product Information

· Product No. SA812

· Weight: 25kg

· Color: Grey

· Standard: JG/T547-2005

· Shelf life: 6 months from production date

· Storage: unopened bag on plate in dry place

· Production date & batch number: find on outside of bag

Field of Application

· Used for fixing high porosity tiles (water absorption more than 6%)

· Used for fixing tiles on internal wall and floor

· Used for fixing tiles on dry and damp area

· Used for fixing tiles on rigid substrate

· Tiles fixed on walls suggested to be less than 20kg/m2

Consumption

5 - 6.5kg/m2 (typically one 25kg bag will cover 4 to 5 square metres)

Application Properties

- Application temperature: 5°C~35°C

- Pot life: 4 hours

-Open time: 15min

- Adjust time: 15 min

- Water addition: 6~7 liter / 25kg

Technical Data

Mix Ratio with water25kg / 5.75liter
Pot lifeMin 3 hours
Open time20 minutes
Grouting after24 hours
Full Service48 hours
FlexibilityPoor
Temperature Resistance0°C - 60°C
AgeingExcellent
Resistance to DampGood
Tensile Adhesive Strength (28 days)

( JC/T547-2005)

> 0.5 N/mm2

Tools

Rubber hammer, Trowel, Elec-mixer, Bucket

Notched Trowel

Substrate Requirement

The substrate should be hard, sound, dry, flat, clean and durable

Substrate Preparation

- Substrate should be flat ,hard, level, dry, and clean with normal absorption

- Clean the surface until free of grease, dust or any stains

- Old paint or plaster should be removed

- Substrate been repaired should be preserved at least 48 hours

Application Enviroment

- Ambient temperature: 5°C~35°C

- Avoid application if too hot or freezing weather

- Avoid application under direct sunlight and strong wind

Safety

- May cause serious damage to eyes

- May be sensitive to skin in case of contact.

- lrritable for eyes, respiratory system and skin

- Keep out of the reach of children

- Avoid breathing the dust

- In case of contact with eyes,rinse eyes immediately with plenty of water and consult a doctor

- Wear suitable protective clothing,gloves and eye/face protection

Packaging Detail:Net 25kg paper bags, also available on request
Delivery Detail:3 days

Related Product for Tile fixing adhesive