Sound insulation diatom mud easy cleaning colorful wall coating - R-476

Sound insulation diatom mud easy cleaning colorful coating

Diatom deposition and mineralization for hundreds of millions of years to form the diatom mineral, the main components of opal, texture soft, porous. Electron microscopy revealed that diatom mineral is a kind of nanoscale porous material (micro pore diameter of about 0.1-0.2 microns).Up to 90% porosity, rules, neatly arranged into circular and needle shape with the number of micro pores per unit area even thousands of times more than charcoal.Prominent molecular crystal structure determines its unique functions. Diatoms mineral has a very strong physical adsorption and ion exchange properties.After finishing, diatoms mineralis widely used in alcohol and medical filter, food additives, nuclear radiation absorbents and other fields.

Functions:

1.Sustainedrelease negative oxygen ion

2.Absorb formaldehyde, air purification.

3.No stained with dust, easy cleaning

4.Fire retardant functions

5.Hygroscopic humidity waterproofinsulation function

6. Excellent resistance to mildew and bacterial

7.Sound insulation noise reduction function

8.Soft color, durably.

20 kinds ofstandard textures:

1) Bark 2)pottery stone 3)painting 4)travertine 5)brushed 6)waves 7)sand blowing 8)embossing

9)such as pine 10)valorum 11)thoughts 12)ripples 13)billows 14)rough batch 15)suppress flowers 16)harvest 17)pottery pattern 18)fabric 19)sand 20)wall grid

Various color:

Notice:

1.Diatom mud needs 48 hours to dry completely, please don’t touch during that time

2.After 48 hours, you can use watering can to spray a small amount of water. After drying use a dry clean towel or sponge to remove surface foam floating material

3.The diatom mud wall material in the process of storage and transportation should pay attention to waterproof, moisture-proof, avoid directly on the damp ground.

4.During the construction process, pay attention not to use air-conditioning, fans or ventilation windows. Dry too quickly, it will increase the difficulty of texture construction.

5.When reconcile materials, please pay attention to the use of masks and other protective equipment. If accidentally mud splashed to the eyes, wash immediately with clean water. When an exception occurs, contact a physician diagnosis

Wall cleaning:

1. The way to clean fingerprint, footprint or handwriting, etc.

Wiping the dirty diatoms walls gently by using the soft rubber, hard rubber or fine sand paper and some other simple tools, you can remove slowly without leaving any traces.

2.The cleaning methods of hanging dust and collector ash.

1)Duster jog slightly or clean rag wipe gently is a kind of effective method;

2)Using vacuum cleaner

3.Coffee, orange juice or some colored liquids

1)Before the stain penetration and diffusion should be promptly wipe. Shallow marks stains can use clean cloth with chlorine bleach to wipe gently in dirty diatoms wall

2)If the stain has penetrated diffusion larger, you need to brush partial Waterborne Primer after dry thoroughly

3)If it is necessary, local water run through, removing and re-patching. This process requires a professional chef to finish.

Your enquiry are welcomed!