Shunan Mosaic Tile Adhesive SA812 - SA812

Shunan SA812 adhesive for tiles mosaic

Grey or brilliant white mosaic adhesive with no vertical slip and extended open time. For interior and exterior wall and floor installations of ceramic, glass and marble mosaics.

product information

·Weight: 25kg

·Color: grey/white

·Standerd: JC/T547-2005

·OEM and ODM projects are welcome

· Shelf life: 6months from production date

· Storage: unopened bag on plate in dry place

· Production date & batch number: Find on outside of bag

Field of Application

1)Used to fix ceramic mosaics, glass mosaics

2)Used both on internal and external walls and floors

3)Used to fix tiles in dry and damp area

Consumption:

5-6.5 kg/m²

Application properties

1)Application temperature: 5°C~35°C

2) Pot life:4 hours

3) Adjust time: 15 min

4)Water addition: 6 liter / 25kg

Application areas:
1. (Interrior wall)substrate: cement based mortar, clay bricks,concrete, the size of the mosaics is suggested to be less than 50 x 50mm

2. (Interior floor)substrate: cement based mortar, artesian ground floor.concrete, the size of the mosaics isunlimited

3. (Outside wall)substrate: cement based mortar, clay bricks,concrete, the size of the mosaics is suggested to be less than 50 x 50mm

4. (Outside floor)substrate: cement based mortar, artesian ground floor,concrete, the size of the mosaics is unlimited

5. Special purpose: swimming pool,the size of the mosaics is suggested to be less than 50 x 50mm

TECHNICAL DATA

tools

Elec-mixer, Bucket,Trowel, 2 meter ruller, wood float, Rubber Trowel,Sponge

Substrate requirement

The substrate should be hard, sound, dry, flat, clean and durable

1)Substrate should be flat ,hard, level, dry, and clean with normal absorption

2)Clean the surface until free of grease, dust or any stains

3)Old paint or plaster should be removed

4)Substrate been repaired should be preserved at least 48 hours

5)Check flatness of substrate and level it if necessary

1)Put clean water in a bucket then gradually add powder in it , by the weight ratio of 1part water per 4.35 parts of powder, mixing at the same time by using slow speed (500rpm) electric mixer until homogeneous lump-free paste is obtained

2)After mixing, leave the paste for 5~10 minutes before using in order to have the complete polymer solute

Application Enviroment

1)Ambient temperature: 5°C~35°C

2)Avoid application if too hot or freezing weather

3)Avoid application under direct sunlight and strong wind

Safety

1)May cause serious damage to eyes

2)May be sensitive to skin in case of contact.

3)lrritable for eyes, respiratory system and skin

4)Keep out of the reach of children

5)Avoid breathing the dust

6)In case of contact with eyes,rinse eyes immediately with plenty of water and consult a doctor

7)Wear suitable protective clothing,gloves and eye/face protection