SA Natural Stone Adhesive - SA814

For fixing ceramic,porcelain and natural stone tiles:, low porosity tiles or substrates,tiling onto existing tiles,walls&floors - details see: https://www.buildingsupplieshub.com/sa-natural-stone-adhesive-10082891
Place of Origin: Shanghai China (Mainland)Brand Name: SAModel Number: SA814Usage: Joint Mortar,Building construction
Type: Cement MortarComposition: Cements and additives, sand, polymersColor: Grey or WhiteQuality System Standard: ISO 9001:2008
SA Natural Stone Adhesive
contact supplier for SA Natural Stone Adhesive


SA814 Natural Stone Tile Adhesive For Floors

Can be used with most tile types including porcelain and natural stone

Packaging

  • Weight: 40kg
  • Color: white
  • Standard:GB24264-2009
  • Shelf life: 6 months from production date
  • Storage: unopened bag on plate in dry place

Field of Application

.Used to fix natural stones, which thickness is less than 20mm when fixed on wall

·Used to fix natural stones both on inside and outside walls and floors

·Stone fixed on wall higher than 3.5m suggested to be fix with mechanical anchor together

·Used for fixing tiles in dry and damp area

Consumption

7~10 kg/m2, dependant on the stone types and adhesive density

Application properties

1) Water addition: 0.23 liter/kg powder (9.2 liter /40kg)

Add water to the mix until you have an adhesive the same consistency as peanut butter.

2) Joint thickness: 5-7mm

3) Adjust time: 10-15 min

4) Pot life: 4 hours

Technical Information

Items

Ordinaryground

Full load

ground and the wall

Ordinary

type

Tensile adhesive Strength ≥

0.5 N/mm2

1.0 N/mm2

Tensile adhesive strength after soaking ≥
Tensile adhesive strength after heat aging ≥
Tensile adhesive strength after

freeze-thaw cycles ≥

Tensile adhesive strength after 20 min open time ≥

Substrate requirement

The substrate should be hard, sound, dry, flat, clean and durable

Substrate preparation

  • Substrate should be flat ,hard, level, dry, and clean with normal absorption
  • Clean the surface until free of grease, dust or any stains
  • Old paint or plaster should be removed
  • Substrate been repaired should be preserved at least 48 hours

Mixing:

Using a mechanical mixer, add 25kg Shunan glass block mortar to 5.75 litres clean water while mixing. Mix well to a creamy, lump-free consistency. Let the mix stand for 3 - 5 minutes before stirring again. Use within 5-6 hours (20°C).

Processing:

1. Apply the mix to the surface using a notched trowel for tiles, the mix can be applied in bed thicknesses between 5 - 7mm, coverage is approximately 5 -10kg/m2, actual coverages will be determined by site conditions, workmanship, etc)

2. Apply only as much adhesive as can be tiled in 10-15 minutes to prevent the adhesive from “skinning” before the tiles are applied

3. Bed tiles firmly using a rubber mallet. When tiling exterior walls ensure the tiles is in full contact with the adhesive. Occasionally, life a block to ensure that there are no air pockets. Never fix tiles using the ‘spot’ method.
Application Environment:

1. Ambient temperature: 5°C~35°C

2. Avoid application if too hot or freezing weather

3. Avoid application under direct sunlight and strong wind

Safety:

  • May cause serious damage to eyes
  • May be sensitive to skin in case of contact. lrritable for eyes, respiratory system and skin
  • Keep out of the reach of children
  • Avoid breathing the dust
  • In case of contact with eyes,rinse eyes immediately with plenty of water and consult a doctor
  • Wear suitable protective clothing,gloves and eye / face protection
Packaging Detail:Packed in 40kg plastic lined paper sacks
Delivery Detail:5 days

Related Product for SA Natural Stone Adhesive