PVC Electrical Conduit Pipes - PVC Electrical Conduit Pipe

Kawsar PVC conduit is the lightest in weight compared to other conduit material, and usually lower in cast than from of conduit. Kawsar PVC conduit is available in three different wall thinkness, with the thin wall variety only suitable for embedded use in concrete, and heavier grades suitable for direct burial and exposed work.

The various fitting made for metal conduit are also made for PVC. The Plastic material resists moisture

and many corrosive substances, but science the tubing is non-conductive an extra bonding (grounding) conductor must be pulled into each conduct. PVC conduit may be heated and bent in the field. Joints to fittings are made with slip- on solvent- welded connection, which setup rapidly after assembly and attain full strength in about one day. Science slip-fit sections do not need to be ratted during assembly. Science PVC conduit has a higher thermal coefficient of expansion than other types, it must be mounted so as to allow for expansion and contraction of each run Care should be taken when installing PVC underground in multiple or parallel run configurations due to mutual heating effect of cable.

KAWSAR meets the requirements prescribed by the following standards organizations:

1. National Electrical Manufacturer's Association (NEMA - USA)

2. American Society for Testing & Material,, (ASTM)

3. British Standards Conduits for Electrical Installation.

Kawsar Ducts and Conduits are subjected to strick quality control to ensure that only products which meets the standard are delivered to customers. KAWSAR has a well equipped laboratory capable of carrying out the required test, It also maintains contact with local independent laboratories for conducting third party product testing and analysis. KAWSAR quality activity starts from selections and purchases of raw materials and equipment, through the manufacturing process, and finally to loading and delivery. KAWSAR is currently adopting ISO 9001 – 2000 Quality System as the basic foundation.

For is quality management, certified & asserted by PSQCA (Pakistan Standard Quality Control Authority) Kawsar Ducts and Conduits are available in 3 and 6 meter lengths. These can be supplied in plane or with belled ends for solvent cements Joints. Bends and fitting accessories for wire and cable protection system, are also available. They are quick and easy to install using commercially available solvent cements.

Best Regards,

Habib-Ur-Rehman

Director,

Kawsar Engineering (Pvt) Ltd. Manufacturing uPVC Pipes and Hand Pumps.

Tel: +92-915830010

+92-915812723

Fax: +92-925818116

M.P: +92-3219090218

Website:kawsar-engineering.com