MD-1108 antistatic tile/ESD PVC tile/ESD floor - MD-1108

MD-1108 antistatic tile/ESD PVC tile/ESD floor

Excellent conductive propertis

surface and ground resistance (2.5x10E4-1.0X10E9Ω)

conductive propertis constiute a special network structure, with a permanent life, they will be completely controlled electrostatic.

Dust-free enviroment

Low voltage static on the surface of the floor ,no dust, make the keeping clean possible, it is easy to remove dirty.

Excellent anti-fire function

PVC floor have the anti-fire performance, which is helpful to prevent the spread of the fire.

Application:

Clean room and Electronics, microelectronics etc

Ground Requirements

The basic ground should be clean,day and flay.

The foundation should be cement or terrazzo groud,but couldn't have the phenomenon of snding and separation. the strength of surface cement can not be lower than no.75

The ground should be flat,the nevenness must be less than 2/2000mm or make self-leveling cement ground.

If the foundation is formation,the ground must do waterproofing.

Note of installation

At installation the ground residual mosture should bot exceed 2.5%(CMDUMB test). the floor,adhesive and Job site temperature must keep above 18 degree celsisu in 24 hours before the installation, High quality conductive adhensive and copper foil must be used in the installation. For the details method,please refer to the contruction program.

Install Accessories

1. Conductive glue

2. Copper foil tape