Hotel,Hospital,Bathroom Wall Mounted Hands Free Automatic Soap Dispenser, Liquid Soap Dispenser (500ML,800ML) - BZ-105A/BZ-105E/BZ-101/BZ-106

Hotel,Hospital,Bathroom Wall Mounted Hands Free Automatic Soap Dispenser, Liquid Hand Soap Dispenser (500ML,800ML)

Feature

1. CE, RoHs Certified.

2. Made by High Quality ABS Plastic and PIR Infrared Sensor.

3. Hands-Free,No Need Touch,It's Health and Clean for People.

4. Option Drop:0.5-1ML.Detect One Time,Soap Drop Out Under the Nozzle,Economical and Convenient.

5. Start with Old Batteries No Problem!

6. When the Battery is running off,the Red Indicator will Remind!

7.The Product Nozzle Stripper Rubber Made from Imported Material.

8. Don't worry about Liquid frozen in Cold Season,the Dispenser also Work as the Design can lighten the Load Weight of Battery.

9. Besides Liquid Soap,It also can be Filled with Other Liquids such as Hand Sanitizers,Shampoo or other Hand Lotions.

Specification

• Inner Packing: One pc with Bubble Bag into Neutral English Colorful Box.

• Outter Packing: 24pcs/Carton;Carton Dimension:51 X 43 X 45 CM.

• Inner Packing: One pc with Bubble Bag into Neutral English Colorful Box.

• Outter Packing: 18pcs/Carton;Carton Dimension:51 X 43 X 45 CM.

• Inner Packing: One pc with Bubble Bag into Neutral English Colorful Box.

• Outter Packing: 20pcs/Carton;Carton Dimension:65 X 33 X 32 CM.

• Inner Packing: One pc with Bubble Bag into Neutral English Colorful Box.

• Outter Packing: 20pcs/Carton;Carton Dimension:67 X 29 X 37 CM.

Certification Owns

Installation Notes

1. Do not install the dispenser above a mirrored surface or above following water.

2. Do not install the dispenser with less than 12 inch (40cm) height beneath the floor.

3. The sensor is at the base of dispenser.The effect range is from 2-12cm undermeath the sensor.

4. The product is design for indoor use only.Direct sunlight or exposed locations can destroy the infrared sensor of the product.The prouct should be lcated well away from sunlight.LED Low Battery indicator when you find it is flashing while the dispenser is on standy mode,batter replacement is necessary.

5. Do not use the alcohol or other chemistry liquid.

6. This product doesn't have waterproof function,pls place product far away from dampness.

Cleaning Tips

1. To clean underneath the dispenser.Slide your hand in over the sensor (about 1/2 inch below sensor).takin care to don't touch the sensor ports.This will allow you to clean without dipensing additional soap while cleaning clean dispenser use damp cloth,clean compartment use dry soft towel.

2. Much liquid soap may congeal (become solid) if unused for longtime.If this happened,add some warm water and stir.This sould return your soap to the proper consistency for dispensing.If doesn't work,theremove the remaining congealed (slidified) and pour warm water into the container.Let the water set few minutes and the activate dispenser unit the wate in the container is dispensed.This will clean the entire system.

3. Please note that dirt or impurities in the dispensed liquid soap may block the dispensing outlets.If you notice that the liquid soap in the container is dirty or has impurities,pleas change the liquid soap.

Welcome to Contact Us for Further Information!