Epoxy self-levelling cement compound for flooring manufacurer - CT

Epoxy self-levelling cement compound for flooring manufacurer

Feature :

Water resistance , oil resistance , acid and alkali resistance, salt spray corrosion and other chemical properties and wear resistance, stamping resistance, scrub resistance and other physical properties, and surface brightness, smooth, beautiful , seamless , easy clean, easy maintenance , durable , to meet modern industrial needs on the ground floor , the ground floor materials plays an important role , is ideal for long-lasting modern industrial flooring materials , has been widely used in pharmaceutical , automotive, electronics, food , electric power , chemical and other industrial floor decoration .

Institutions:

A:Epoxy self - leveling including concrete base and coated two - part epoxy self - leveling the ground.

B:Concrete Base : the use of concrete strength not less than c25 a casting molding, floor pressure resistance, impact resistance requirements, grass - roots can be dealt with using two-way reinforced concrete.

C:Self - leveling epoxy floor coating : Coating at the end of, in the coating, Putty floor, surface coating.

D:Bottom coating, epoxy primer, using penetration and strong adhesion of epoxy primer, even paint film in a row, more than Lou, enhance grass - roots surface adhesion.

E:In the coating, epoxy mortar layer, two - component epoxy add 100 quartz sand, enhanced coating surface smoothness and strength of coatings.

F:Putty - storey epoxy putty - tier, two - add epoxy Putty powder, further to the coating surface leveling, and surface is smooth, smooth.

G:Surface coating, paint paint, self - leveling epoxy topcoat paint uniform plane

Construction of attention:

1, construction temperature over 5 degrees centigrade, to < 5 C construction, Selection of special formula. Humidity proposals under the 75 construction.

2:Construction ensure proper ventilation. When the amount of modulation used, no more than 30 minutes.

3:The construction process to do the maintenance work, avoid dust, debris invasion, influencing the effect of paint.

4:After construction is complete, take conservation at least 7 days before they can be put into use. During maintenance, especially not have any water infiltration or various types of solution.

5:After construction is complete, take conservation at least 7 days before they can be put into use. During maintenance, especially not have any water infiltration or various types of solution.

6:Keep spreading surface cleaner, by the spreading moisture content must be less than 7.

7:Keep the painting clean, is strictly prohibited in the construction of a large number of dust environment.

Picture:

Business card :