Energy-saving Cheap Prefabricated villa for holiday resort - NPXG-1

1.Energy-saving & enviorment protection, 2.Low-self weight and material saving, 3.Saft and durable, 4.Perfect joint - details see: https://www.buildingsupplieshub.com/energy-saving-cheap-prefabricated-villa-for-holiday-resort-10038106
Place of Origin: Shanghai China (Mainland)Brand Name: BeststeelModel Number: NPXG-1Structure: light steel
Roof tile: corrugated metal sheet, mason tile, asphalt tile or terracotta tileShape: hip roof,gable roof or flat roofWall: PU, RW sandwich panel, fiber glass insulation boardUse life: over 70 years
Earthquake resistance: Grade 9Wind resistance: 56.1-61.2m/s hurricaneThermal resistance: 6K.㎡/wSound reduction index: no less than 45dB for thin wall or 66dB for thick wall
Endurable Temperature: -50 Centigrade to 50 Centigrade   
Energy-saving Cheap Prefabricated villa for holiday resort
contact supplier for Energy-saving Cheap Prefabricated villa for holiday resort


Characteristics

  1. Dry condition, no pollution, no noise
  2. 90% materials can be recycled.
  3. Low-carbon
  4. Steel quantity uesd for low-rise villa is below 30kg/<sub>2</sub>and that for multistoried building is about 40kg/<sub>2</sub>.
  5. The self-weight of the whole structure is only 1/4 of tranditional brick-concrete structure.
  6. Good anti-corrosive performance: 0.8-1.5mm AZ steel, AZ100-AZ150, Zn180g/<sub>2</sub>-275g/<sub>2</sub>
  7. The section hight: 70-150mm
  8. Steel yield strength: Q345-G550
  9. No corrosion, mould or worm damage
  10. Increase using space by 10%
  11. Various metal parts, accessaries, insulation materials, finishes and tiles for your choise
  12. Dead load: 0.48kpa
  13. Roof snow load: 1.20kpa
  14. It takes 40 days for a building about 300-500<sub>2</sub>, with 25 days for installation.
  15. 14 skilled workers can assemble a 500-600sqm prefabricated house in 2 weeks.

Specification

No.SortMembersDescriptions

1

Measurement

lengthcustermized
Roof Single Spancustermized
Wall Single Spancustermized
Clear heightBFS can do 3 storeys buildings with light gauge framing system
Roof pitchslope is 1:20(1.15°)~1:50(2.8°)

2

Specification

Roof* 5:12 Roof slope; Roof truss at 24” (609 mm) O.C. connected to wall tracks

* R30 Fiberglass insulation in the roof truss cavity

* 1/2”(12mm) OSB board on top of the truss chord

* Waterproof attached to OSB board

* Mason tile, corrugated meatal tile, asphalt tile or terracotta tileshingle roofing (Standard)

* 1/2”(12mm)Gypsum board for inside ceiling

Exterior wall* 3.5” (89 mm) Wall studs spaced at 16” (406 mm) or 24” (609 mm) O.C. anchored to the foundation

* R13 Fiberglass Insulation in the wall stud cavity

* 1/2” (12 mm) OSB Board Covered On the Outside of the Stud Flange

* Breathing paper

* 5/16” (8mm) cement Siding on the Outside surface of the Exterior Wall

* Paint on the siding

* 1/2” (12mm) Gypsum Board on the Inside Surface

Interior Wall* 3.5” (89 mm) Wall studs spaced at 16” (406 mm) or 24” (609 mm) O.C. anchored to the foundation

* 5.5” (140 mm) Wall studs spaced at 16” (406 mm) or 24” (609 mm) O.C. in bathrooms for plumbing system

* 1/2” (12mm) Gypsum board or waterproof Gypsum board on both Sides of the wall frames

* Normal interior door, c/w frame and casing

* Wall tiles in part of Bathroom and Kitchen

Floor* 10” (250 mm) or 12”(300mm) Floor Joists spaced at 16” (406 mm) or 24” (609 mm) O.C

* 3/4” (18mm) OSB Board on floor joists

* 1/2” (12mm) Gypsum board for the ceiling

* Tiles in Bedrooms & living room.

* Tile flooring in Bathrooms and Kitchen

* MDF Baseboard

Kitchen* Laminate Panel Cabinets c/w hinges & laminated panel doors (Standard)

* Brushed nickel handles & knobs on doors & drawers

* Granite countertops c/w backsplash

* Stainless sink c/w chromed goose neck faucet with sprayer

Bathroom* 60” (1524 mm) Bath tub c/w chromed shower faucets

* Toilet 1.6 Gal. per flush

* Granite countertop vanity

* Lavatories c/w chromed faucets

* Laminate Panel Cabinets c/w hinges & laminated panel doors (Standard)

Others* Steel stairs included

* Plumbing and Electrical pipes (wires) systems excluded

ChannelGalvanized Steel Plain Sheet press molding Material: Q235. Painted

Maximum supporting Spacing:

ApplicatitionSpanLength

Roof

Single Span1800mm
End Span2100mm
Interval Span2500mm
Cantilever without supporter200mm
Cantilever with supporter600mm

Wall

Single Span2000mm
End Span2400mm
Interval Span2600mm
Cantilever400mm

Packaging Detail:Flat paper; other package box suitable for the container shipment; plastic strip One 40'HQ container can load all the materials for about 200 square meters
Delivery Detail:30-50 days; Upon the quantity of order

Related Product for Energy-saving Cheap Prefabricated villa for holiday resort