ECM epoxy repair mortar for concrete crack damage repair mortar manufacturers - ct-ecm

1:With impermeability , frost, salt , alkali resistance, weak acid corrosion., 2:Operation to facilitate the construction - details see: https://www.buildingsupplieshub.com/ecm-epoxy-repair-mortar-for-concrete-crack-damage-repair-mortar-manufacturers-10082924

Place of Origin: Shandong China (Mainland)	Brand Name: CaiTong	Model Number: ct-ecm	Usage: Joint Mortar
Type: Cement Mortar

ECM epoxy repair mortar for concrete crack damage repair mortar manufacturers

Description:
This thin repairing product is made of epoxy resin ,hard filler with a high strength. Well-penetration , fast plugging , seal , cauterization resistance.
Features:
1 Thixotropic: under the static mode, the material can not deform & follow , even if smear on the top of the ceiling .grooves .holes etc, when mixed & pressed , it has excellent flowability and easy to use.
2 Well adhesion: It has good mechanics, difficult to crack at the interface with the concrete.
3 Excellent matching with concrete: performance of ageing resistance & anti-carbonation. The coat will deform with the concrete synchronously. Avoid the coat break away from the concrete, due to the interface stress.
4 Excellent flexibility : the harden concrete. mortar can prevent attack & deformation , hard to damage .
Application:
1.It can be used in the repairing of the pores , honeycomb ,surface voids etc. of concrete surface.
2.It can be used in anti-leakage,anti-carbonation protection,micro crack sealing and decoration
3.It can be used in defect surface repairing of high-railway ,passenger dedicated line ,van beams and Orbital plate.
4.It can be used in repairing of the watered concrete with surface-free milk, fine aggregate exposed, feel rough

Specification

Items	Indexes	Remarks
compressive strength	≥85.0 M Pa	-----
Pull-out resistance	≥10.0M Pa	-----
adhesion with concrete	4.0M Pa	“”shows the damage of C50 concrete body
Adhesion with steel plate	6.0M Pa	-----
Abrasion resistance	7.6h m2kg	abrasion speed of 14.3m / s (hydraulic concrete test standard)
Abrasion resistance	2.79h.cm2g	abrasion speed of 40m / s (epoxy resin mortar test standard); silica fume concrete abrasion strength 1.09h.cm/g for c50
Compressive elastic modulus	2150M Pa	-----
thermal expansion coefficient	9.2×10-6 oC	-----
carbonation depth	0.86mm	Equivalent to 50 years in the natural air
Impact resistance	2.1kj/m2	-----
Anti-aging	excellent	Equivalent to 20 years in the natural air

Attention;
1, Configured glue should be used within 30 minutes, is prohibited to use without mixing or even the state of clay in the initial setting.
2, Prohibited in the moisture base to the FDA, you can do it after dried. so as not to affect the bond strength with the base.
3, Long placement of Part A and Part B could appear slight layer phenomenon,so it is better to stir evenly before use.
4. During construction you need to wear necessary protective equipments and keep ventilation. If it contacts you or your eyes, please wash it with run water quickly. You need to see your doctor immediately on the serious condition.

Picture:

Packaging Detail:according to custmer demands

Delivery Detail:7-10 working days ,according to your quantity