A roll of Anti Slip Strips (Safe product for various stairs)

Strong Glue, Removable glue., Various size as your wish. Comfortable, Service life:2 years., Glue thickness is 0.08mm-0.1mm - details see: https://www.buildingsupplieshub.com/a-roll-of-anti-slip-strips-safe-product-for-various-stairs-10093242
Type: Stair PartsPlace of Origin: Guangdong China (Mainland)Brand Name: ShinDorn or Glutex 
A roll of Anti Slip Strips (Safe product for various stairs)
contact supplier for A roll of Anti Slip Strips (Safe product for various stairs)


Quick Details: (Anti-slip roll) for stairs

Material: PVC or TPUUse: Toilet and Kitchen or tub or various stairs.
Adhesive side: Single SidedAdhesive : Acrylic or Rubber
Adhesive type: Water activatedDesign printing: Clients offer
Color: AnyPattern: Any
Brand name: Glutex or ShinDornWidth: 3cm to 112cm (roll)
Length is 5m to 1500m (roll)Pass Reach standard.
WaterproofService time: 2 years.
Weather resistanceThickness is 0.9mm
Glue thickness is 0.02-0.1mmPVC thickness is 0.7mm
Removable adhesiveNo damage floor or tub or wall or stairs when remove
Fit various material tub or floor

Packaging & Delivery:

Packing detailpacking as buyer need or normally in carton
Packing detail1roll with polybag. 288bags in master carton/41/41/14cm. G.W.14.5kgs
Delivery Detail20-40days

Specifications:

Use rangeEffectively prevent people slipping on massage room, shower, bathroom, washroom, lavatory, wet place, kitchen,step stairs. toilet, massage bathtub, bathtub, stair, wet place, especially old people, kids, and workman
Surfacecomfortable and obvious concavo-convex
Color1-10 printing color on transparent PVC
Glue Viscosity1. 25°C is 2800-3500cps/LTV.

2. Glue thickness is 0.10m/m

3. Glue solid cement 55%

4. Curing time: 20-30 minutes for finger touch, 24hours for whole dry.

Pass test by SGSEN71 part III, part 9, ASTM963.03, ASTM D3421-75, no BBP, no

No DBP, no DEHP, it fit Europe Reach standard and U.S.A. TSCA standard.

Featureswater and weather resistance
Use way1. Clean the floor or Wall

2. Tear out the paper of treads, and put it on place as you wish

How to apply1.For porcelain, steel, and cast-iron tubs or stairs, clean tub or stairs surface with non-abrasive scouring powder and warm water. For fiberglass, ABS and other plastic tubs or stairs, clean surface according to manufacturer’s instructions. Warning: Do not use liquid or aerosol cleaners to prepare surface or tub or stairs treads will not adhere properly.

2.Rinse thoroughly. Allow the tub to dry.

3.Arrange tub or stairs treads in the tub or stairs with the backing in place to determine ideal positioning.

4.Position tub treads at least one to three inches apart for better surface coverage.

5.Remove backing from tub or stairs tread and apply one at a time to tub or stairs surface.

6.Press tub or stais tread evenly on the tub surface and try to avoid stretching.

7.Repeat steps 4 and 5 with additional tub or stairs treads until all the tub stairs treads are applied.

8.Allow the tub or stair treads to stand for at least 12 hours before using tub or shower.

How to remove1.Lift corner of tub or stairs tread with finger nail, wood or plastic scraper.
Warning: Do not use metal, glass, or other abrasive scraper to remove.

2.Slowly Peel back tub treads until removed.

3.If any adhesive residue remains, clean with aerosol stain remover.

4.Allow to soak for 15 minutes and wipe with a dry rag. Repeat as necessary.

5.Rinse thoroughly. Allow the tub to dry.

Dry timeDrying/curing condition: room temperature 24 house.
ColorVarious color
ShapeAnimals, Sea Animals, Roll Various shapes as your wish
Factory passISO-9001:2008 Quality serious system and ISO14001:2004 Environment system.
Packaging Detail:1roll with polybag, 288rolls in master carton/41*41*13cm G.w.14.5kgs. Shin Dorn can offer various different sizes for you.
Delivery Detail:21 days after order confirmed.

Related Product for A roll of Anti Slip Strips (Safe product for various stairs)