2.4G3.5 inch digital wireless video peephole door camera /door bell/unlocking - PH--3501

1. color 3.5" TFT LCD, 2. with image memory, 4. 2.4GHz, 5. easily DIY installation - details see: https://www.buildingsupplieshub.com/2-4g3-5-inch-digital-wireless-video-peephole-door-camera-door-bell-unlocking-10052196
Type: Door ViewersPlace of Origin: Guangdong China (Mainland)Brand Name: OEMModel Number: PH--3501
Material: AluminumAngle: 180 DegreeMonitor: 3.5" TFT LCDFrequency: 2.4GHz
wireless scope: >300mWire: wirelessInstallation: easily DIY 
2.4G3.5 inch digital wireless video peephole door camera /door bell/unlocking
contact supplier for 2.4G3.5 inch digital wireless video peephole door camera /door bell/unlocking


2.4Ghz digital wireless peephole video door viewer with 3.5" LCD monitor

2013 new design

Model PH-3501

1. Introduction

The product is composed of peephole camera, peephole host, indoor monitor and wireless unlock control. You can operate the indoor monitor to communicate with visitors via voice and video, and then unlock the door if you wish. It’s applicable in apartment, hotel, office, building and so on.

The product is easy to install in variable types of doors (the door thickness ranges from 35 to 110mm, the peephole diameter ranges from 14 to 38mm). Indoor monitor is portable. It can be hung on the wall or cabinet, or be placed on the desk, tea table.

2. Features

(1) 2.4GHz digital frequency hopping and encryption technology, transmission distance up to 200 meters at open area, robust anti-interference

(2) Clear night vision can capture image in low-illumination environment

(3) 3.5 inch TFT color panel for indoor monitor, the peephole is made of zinc alloy.

(4) Surveillance, wireless unlock, hands-free call and talk

(5) 16 chord melodies and melody volume is adjustable

(6) Date (only 1V1 system support) and time shown on the screen

(7) Indoor monitor could take pictures automatically or by instruction, it could store up to 100 pictures with date and time

(8) Brightness and talk volume are adjustable

(9) Support motion detection. When the visitor comes close to the peephole within 1.5 meters, the indoor monitor will start to work and take one photo soon. If no action is taken for 10 seconds after that, it will enter into sleep mode.

(10) The peephole works with 3 pieces of AA battery, and the indoor monitor works with BL-5J Lithium battery.

(10) The peephole can work about 1~2months. The peephole with USB power adapter can work all the while.

(11) Wireless unlock control supports power on and power off unlock mode

(12) One peephole supports up to 4 indoor monitors and vice versa

3.Specifications

Peephole

Indoor monitor

Light Source2 LED lightsUSB PowerInput:100-240V 50/60Hz

Output:DC 5V/1A

CameraCMOS 300K pixelsScreen3.5”TFT 320×240

7”TFT 800×480

Battery3 pieces of AA battery, or 5V 1A power switchBatteryBL-5J 1250mAh
Size102×70×13.8mmSize3.5” 141×87×20 mm

7” 236×130×18 mm

MaterialZinc alloyRecharge time3 hours
Standby1~2 monthsStandby3.5” 20 days

7” 4 days

4. Peephole camera

(1) Motion detection sensor (2) Speaker (3) Infrared light (4) Camera lens (5) ‘Call’ button (6) Microphone (7) Indicating light for low voltage (8) ‘Pair’ led (9) Battery slot

(10) Power switch (11) USB interface for charge (12) ‘Pair’ button

5.Indoor monitor

1) Speaker (2) TFT screen (3) Antenna (4) Microphone

(5) Monitor" button (6) Unlock button (7) Talk button

(8) Left (9) Down (10) Right (11) charging light

(12) Working light (13) Take picture button (14) Up (15) USB interface (16) Power switch (17) Fixed slot (18) Battery lid (19) Bracket

6. Installation instructions of peephole

Remark: Please make sure that the power switch is off or the battery is not inserted before installation.Flexible PCB is easily twisted and flectional, you should gently lift to avoid drape, nick, crunch caused by bump with other hard thing. You can take a look at whether there is crack on the PCB. If crack, you should exchange it.

The installation process for peephole is shown in the below diagram, the detailed steps are as follows.

Or take off the screw on the bottom, remove the back box fit to the wall, embed the outdoor camera to the back box and use the screw to fix it as the following diagram

7. E-lock installation

E-lock and power of e-lock are not included in this product. Wireless unlock control connects the e-lock, shares 12V power adaptor with e-lock when it works.

Notes: The distance between wireless unlock control and outdoor camera should be within 10 meters so that the wireless unlock control is able to receive unlock command. The remote control uses 27A/12V battery. User presses of remote control to unlock. The work distance between remote control and unlock control should be within 15 meters.

Schematic diagram

The wireless video peephole system can work together with intelligent lock. Special remote control module will need to be embedded into the intelligent lock. Intelligent lock uses 4pcs AA batteries.

The system can work together with intelligent lock, Intelligent lock uses 4pcs AA batteries.

8.Packing list in the box

Outdoor part (Peephole part)

(1) Peephole host (2) Camera of peephole (3) Screws and tape

(4) Fixed board

(5) Wireless unlock control (option) (6) Remote control (option)

Indoor monitor part

(9) indoor monitor

(10) USB power adaptor; Input: 100-240V 50/60Hz Output: 5V/1A

11) BL-5J battery

(12) Fixed iron for indoor monitor

(13) User manual

color box:

Packaging Detail:Color box for one set 5 sets in one carton GW: 10.5kgs, Volume weight: 14.5kg
Delivery Detail:3 days for samples, 7-10 days for bulk order

Related Product for 2.4G3.5 inch digital wireless video peephole door camera /door bell/unlocking