Wall Panel Cement Board(CB-003) - CB

Wall Panel Cement Board(CB-003), 1)Easy to Install., 2)Standard Quality, 3)Economic, 4)CE & ISO Approved. - details see: https://www.buildingsupplieshub.com/wall-panel-cement-board-cb-003-10029146
Place of Origin: Guangdong China (Mainland)Brand Name: PRANCEModel Number: CBType: Fiber Cement Boards,Cement Board
Edge profile:: Square\Feather EdgeSize: 595x595;605x605;600x1200;1200x2400Thickness: 6mm-18mmFunction: Fire proof,Water proof,Moisture-proof
Heat insulation:: 1.14m2k/w.Flexural breaking force:: 740N~900NFireproof Performance: Class ADensity: 1.2~1.3X10^3 KG/M3
non-asbestos:: 100%non-asbestos   
Wall Panel Cement Board(CB-003)
contact supplier for Wall Panel Cement Board(CB-003)


Wall Panel Cement Board(CB-003)

---Cement Board

---Cement Board

---Cement Board

PRANCEBUILDING MATERIAL CO.,LTDis a leading professional manufacturer of ceiling and drywall partition system in China, which has won a very high reputation within our client network after more than 16 years of effort and development:

Our Main Products:
1. Aluminum false ceiling.
2. T grid suspension system.
3. G.I. drywall for ceiling and for partition.
4. Gypsum board and Vinyl laminated Gypsum tile.
5. Mineral Fiber ceiling board.

PRANCEGypsum Board Drywall Introduction.

Your drywall can be virtually any shape, anywhere. Choose from a wide range of heavy-duty system options that provide code-compliant performance in both fire rated and non-fire rated applications with labor-saving advantages.

1.Cement Board Drywall Specification.

Convenient ConstructionThe plaster board can be constructed easily by nailing ,cuting and planing,and thus it becomes the first choice among home decoration materials.
Raw materialThe gypsum board is characterized for lightness and high intensity,dryness operation, green environmental protect, convenient construction and good processing quality.
Size595x595
605x605
1200x2400
1220x2440
Thickness7,7.5,8,9,9.5,10,12,12.5,13,15,15.9
Surface treatmentPaper/PVC laminated/foil back
Production capacity10,000m2/day

2.Cement Boardof ceiling & wall partition system.

PRANCE System is a modern, non-load bearing and quickly assembled on site. The system consists of Gypsum Board screw fixed to lightweight galvanized metal sections and joint finished with drywall system is suitable for all internal applications for commercial and residential.


Exquisite, Modern and Adjustable

PRANCE drywall system provides smooth, seamless and crack-free wall surface. Thanks to the distinctive property of PRANCE gypsum Board, it allows easy further decoration by either painting or wallpaper work. Moreover, a renovation can be done easily without any disturbance of office building structure.

Durable and Standard Quality
Materials and accessories of PRANCE wall system are manufactured by state of the art technology in accordance with international standards, such as, British Standard and The American Society for Testing and Materials. Customers therefore can be assured of safety, standard quality and high durabiltity of PRANCE Wall systems.

Lightweight, Easy to Install and Economic

PRANCE wall weight much less than masonry partitions of comparable thickness, thus providing real savings in structural design. This enables quick and easy installation, and produces time and cost savings.
Specially Designed and Patented Materials of Gyproc
High quality galvanized PRANCE frame metal sections of drywall system are manufactured by state of the art technology called drywall STEEL, to reinforce the cross section of metal sections. C-Stud is also specially designed to be easy when connected, which suits applications requiring extra strength or for length extension of C-Stud. Ready-punched holes from factory provide excellent incorporation of services.

Applicable to Various Usages as Required

PRANCE wall system can be designed to suit various types of office application.
Office buildings requiring extra fine resistance, standard drywall system can provide a half-hour fire resistance. Other drywall Systems are also available to provide resistance up to 2 hours.

Other special properties such as heat insulation wall, high moisture resistant wall, acoustic wall, can also be provided by drywall system.
3.Cement Board Drywall Installation.
Installing drywall can be easy, but taping the joints between panels requires some practice. Some do-it-yourselfers install the drywall themselves, then call an experienced drywall taper to finish the job.

­­Although it's easy to figure how much drywall to buy (just compute the square footage of the walls and ceiling), it takes some planning to end up with as few joints as possible.­ The standard-size sheets for walls measure 4 X 8 feet. They are usually installed with the long side running from floor to ceiling, but if you can eliminate a joint by placing them horizontally, do so. All drywall sheets are 4 feet wide, but many building-material outlets offer 10-foot and even 12-foot lengths. The most popular thicknesses of drywall are 1/2 inch (walls) and 5/8 inch (ceilings), but check your local building code for requirements.­

Step 1:Construct a pair of T-braces from 2 X 4s about an inch longer than the distance from floor to ceiling. Nail 2 X 4s about 3 feet long to one end of each longer 2 X 4 to form the Ts. Alternately, adjustable T-braces can be rented.

Step 2:Cut drywall panels to size. Use a sharp utility knife along a straightedge to cut drywall. After you make the cut through the face paper, place the board over a length of 2 X 4 laid flat on the floor, or some other type of support, and snap the scored section down. The gypsum core will break along the line you cut. Then turn the panel over, cut the paper on the other side, and smooth the rough edges with very coarse sandpaper on a sanding block.

Step 3:Install drywall panels on the ceiling. If possible, try to span the entire width with a single sheet of wallboard to reduce the number of joints. Position and wedge the T-braces against the drywall sheet to hold it in place until you finish nailing it.

Step 4:Drive nails at 6-inch intervals into all the joists covered by the sheet. Start in the center of the drywall panel and work out. Give each nail an extra hammer blow to dimple the surface slightly without breaking the face paper.

Step 5:When the ceiling is finished, cut and install wall panels. Carefully measure for any cutouts in the drywall, including electrical outlets, switches, or light fixtures. To make cutouts, draw a pattern of the cutout on the wallboard, drill a hole on the pattern line, and then use a keyhole saw to follow the pattern.

Step 6:Space the nails 6 inches apart along studs, but start nailing 4 inches from the ceiling. Butt the wall panels against the ceiling sheets. Dimple all nails. Nail metal outside cornerbeads to cover any outside corners.

Taping Drywall

The next step in installing drywall is covering the nails and joints, called taping.

Step 1:Use a 5-inch-wide drywall taping knife to spread joint compound into the slight recess created by the tapered edges of the drywall sheets. Smooth the compound until it is even with the rest of the board surface.

Step 2:Center the drywall tape over the joint and press it firmly into the compound. Because some compound will squeeze out, make sure that there is still a good bed underneath. When you get the tape embedded into the compound all along the joint, smooth it with the taping knife. At the same time, fill all the nail dimples with compound.

Step 3:When the compound is completely dry (usually 24 hours later) apply a very thin second coat of compound that extends out a few inches to either side of the first coat. After the second coat dries completely, apply a third coat, this time with a 10-inch-wide taping knife, extending the compound about 6 inches to either side. When the third coat is dry, feather all the edges with a sanding block covered with medium-grit sandpaper.

To tape inside corners, including the spots where the walls and ceiling meet, cut the tape to length and fold it in half. After laying the bed of compound, press the folded tape into the compound and feather the compound out at least 1 1/2 inches to each side. The corners require three coats, and the last coat should extend about 8 inches to each side. Sanding is required here, too.

To finish the outside corners, install a metal corner (from your building-supply store), then apply three coats of compound that taper up to the bead. The last coat should extend the compound on each wall to about eight inches wide. Sand as with other drywall joints.

Let the walls dry for up to five days, following the recommendations of the joint compound manufacturer. Give the surface of the drywall a coat of primer made for paint or wallpaper. When the primer is dry, sand the drywall surface lightly with fine-grit sandpaper on a sanding block. Be sure to sand between each additional coat of paint with fine-grit sandpaper. New drywall should receive at least three coats: a sealer, primer, and finish coat.

4.Cement Board Production.
16 years of manufacturing experience.
Our modern manufacturing facilities and state-of- the art equipment allow us to customize the products to meet the most stringent customer requirements. In co-operation with our global business partners, we have developed numerous products to international standards.
Former successful experience will ensure our global partners stable, competitive pricing and on-time delivery.
5.Cement board Loading.
6. The Project.
The USA embass In guangzhou
7. Our professional & active export team.
8. Remark.

Quality: the main point we value a lot,CE & SGScan prove our attitude.

Service: we dedicate ourselves to offer you ourprompt service.

Responsibility: be responsible to you meansbeing responsible to ourselves.

Integrity:loyal to our products, loyal to our customers.

-------
If you are interesting in our products, pls contact us now
Email: fspranceali@ vip.163.com
PRANCE BUILDING MATERIAL CO.,LTD.
http://www.fsprance.com
Packaging Detail:Standard export packing for cement board 1200x2400x9mm, 960pcs/20ft 1200x2400x12mm, 720pcs/20ft 1200x2400x12.5mm, 680pcs/20ft 1200x2400x15mm, 560pcs/20ft
Delivery Detail:15 days for cement board

Related Product for Wall Panel Cement Board(CB-003)