Wall mounted Tissue Holder with magic sticker - MS81016-7

Tissue Holder, 1.New tech good tissue holder;, 2.Size:115 x 87 x 136 mm;, 3.Material:Stainless steel,iron wire;, 4.Hot sell. - details see: https://www.buildingsupplieshub.com/wall-mounted-tissue-holder-with-magic-sticker-10004639
Type: Paper HoldersPlace of Origin: Guangdong China (Mainland)Brand Name: YUWEIModel Number: MS81016-7
Material: MetalMetal Paper Holder Surface Finishing: ChromeHolder material: stainless steel , iron wireSticker material: SEBS
Holder color: Chrome, Silver, Golden, etcSticker color: Brushed silver, colorful, golden, transparentDimension: 115 x 87 x 136 mmApplication: Kitchen, Bathroom, Livingroom, Sitting room, etc
Usage: Tissue HolderStyle: Tissue HolderDelivery: By Sea, By AirPacking: Paper box
Wall mounted Tissue Holder with magic sticker
contact supplier for Wall mounted Tissue Holder with magic sticker


Wall mounted Tissue Holder with magic sticker

Tissue Holder
1.New tech good tissue holder;
2.Size:115 x 87 x 136 mm;
3.Material:Stainless steel,iron wire;
4.Hot sell.

Tissue Holder Feature:

Wall mounted Tissue Holder with magic sticker
1.2014 New Arrival, Modern, Full New Technology
2.Freely Sticker: It can be strongly attached to the surface after installation
3.Metal Holder : Fashion, Convenient & Usable Design with high-grade process
4.Application: Kitchen, Bathroom, Living room, Sitting room, etc
5.Sticker with No any Mark, No Hole and no damage to the surface after remove
6.Easy Installation, No need complicated methods with big nails or glue sticker, suction,etc.

Parameter for Tissue Holder :

StickeR MaterialSEBS + PET + PC
Rack MaterialStainless Steel Or Steel with Chrome plated
Sticker ColorTransparent or Brushed Sliver, Golden
Rack ColorStainless Steel or Chrome
Rack Size115x 87 x 136mm or customized
Max-Load5 KGS
Surface ProcessElectrolysis Stainless steel; Chrome Plated

Tissue Holder Install Ways:

First, Clean the surface and ensure no water, dust, oil and wax before installation.

Second, Peel the protective film on the backside;

Third, install the magic sticker on the cleaned surface.

Then, press a little hard on the sticker surface about 10 seconds, to push out the air from underneath;

Finally, Hang metal shelf in the buckle properly, snap the buckle down, when hear the sound “ cut ” you can use it at your will.

Remove Ways:

Open the PC Buckle first then take down the metal shelf;

Uncover the film edge slightly, then tear off it slowly and vertically, make sure not to bend it.

Trade Terms:

ShipmentEXW, By Air, Ocean shipment ( FOB, CFR, CIF )
PaymentT/T 30% Deposit, Balance be paid against copy of B/L, Cash……
Sample time5 – 8 Days
Mass Time12 – 20 Days As per your final Quantity
PackageEach in a paper box, then As per your requests in the Cartons

Attentions:

1.Wipe clean the wall if there is water, oil or wax before installation.

2. Original adhesion will be recovery after cleaning if adhesion is not good with dust sticker on it.

3. Don’t hang the Antiques, Fragile, Dangerous goods or over-weight use.

4. Don’t install on the surface that temperature is more than 50 Degree Celsius

5. Soft, folded, deformed easily and rather rough surface should not install the magic sticker.

6. Please don’t pull and lunge with sharp objects, to prevent it deformed

7. Avoid direct sunlight, please don’t continue to use it if the products are abnormally changes or not firm sticker.

Detailed pictures for reference:

Packaging Detail:1.Each in a paper box, 12 pcs in a carton;2.Carton MEAS:31 x 29 x 18 cm;3.G.W.: About 5 KG / CTN.
Delivery Detail:20-25 days as per your final QTY

Related Product for Wall mounted Tissue Holder with magic sticker