Surface Protection Tape Butyl Rubber Adhesive for Underground Steel Pipe Corrosion Protection - T-240, T-250, T-265, T-280, T-2100, T-2130

Surface Protection Tape Butyl Rubber Adhesive for Underground Steel Pipe Corrosion Protection & Anti corrosion Coating - details see: https://www.buildingsupplieshub.com/surface-protection-tape-butyl-rubber-adhesive-for-underground-steel-pipe-corrosion-protection-10089975
Type: Other Plastic Building MaterialsPlace of Origin: Zhejiang China (Mainland)Brand Name: Ningbo IdealModel Number: T-240, T-250, T-265, T-280, T-2100, T-2130
Usage: Surface Protection Tape Butyl Rubber Adhesive for Pipe ProtectionAdhesive: Butyl RubberBacking: Polyethylene PE HDPE LDPE MDPECertification: ISO9001:2008
Other Names: Protection Tape,Protective Tape,Butyl Tape,Surface Tape   
Surface Protection Tape Butyl Rubber Adhesive for Underground Steel Pipe Corrosion Protection
contact supplier for Surface Protection Tape Butyl Rubber Adhesive for Underground Steel Pipe Corrosion Protection


1. INTRODUCTION TO PRODUCTS:

Outer Tape ( Surface Protection Tape Butyl Rubber Adhesive for Underground Steel Pipe Corrosion Protection ) Systems Description:

The Outer Tape T-200 series is cold applied Protection Tapes coating systems for Protection of the pipe and its T-100 Series surface from damages. Butyl Rubber Adhesive is a key in ground performance characteristic coupled with the low and high density polyethylene backing. This kind of tape can be applied by hand or with a wrapping machine.

Product Advantages:

  • Conformable to irregular shapes.
  • No release liner.
  • Established in ground history.
  • Complies with AWWA (American Water Works Association) C-214 standard.
  • Compatible with general coating systems

T-200 Outer Tape ( Surface Protection Adhesive Tape ) series Coating Systems with AWWA C-214 Standard:

Type of Protection Tapes:

T-240

T-250

T-265

T-280

T-2100

T-2130

Thickness:

(ASTM D 1000)

Total

mmmilmmmilmmmilmmmilmmmilmmmil
0.38150.51200.64250.76301.02401.2750
Film0.28110.38150.51200.63250.64250.7630
Adhesive0.1040.1350.1350.1350.38150.5120

Tensile:

29 lbs/in

39 lbs/in

39 lbs/in

53 lbs/in

66 lbs/in

78 lbs/in

Length:

60 Meter

50 Meter

40 Meter

30 Meter

25 Meter

20 Meter

Width:

2, 3, 4, 6, 9,12

Colour:

Black, White, Red, Blue, Purple, etc.

Elongation:

300%

Adhesion to Inner Layer T-100

(ASTM D 1000)

46 oz/in, 5N/10mm

Cathodic Disbandment: (ASTM G8)

0.25 in radius 6.4 mm

Water Vapor Transmission Rate:

(ASTM F1249)

0.2g/100in2/24h, 0.3mg/cm2/24h

Water Absorption: (ASTM D570)

≤ 0.1

Volume Resistively: (ASTM E257)

2.5 X 1012ohm·cm

Dielectric Strength: (ASTM D 149)

40 KV

Temperature Range:

(Normal in Ground Service)

-30 to 160oF, -34 to 71oC

2. POLYETHYLENE PE TAPE & PRIMER APPLICATIONS:

Rust Removal > Priming> Inner Tape & Outer Tape Wrapping

2.1 Rust Removal

Steel Surface needs treating. Its quality shall reach Sa2 or St3 grade as prescribed in GB8923-88 Pre-paint Steel Surface Rust Grade and Rust-removal Grade, and it shall be dust-free.

2.2 Priming

Primer shall be stirred well before painting. An even film of primer is painted on the steel surface that is rust-removed completely and dust-free. After the primer dries up (one may feel no sticky). The steel pipe can be wrapping with tape (it usually takes 3 to 5 minutes). The primer dosage usually amounts to 80 to 100g / m2.

2.3 Inner Tape (Anti corrosion Tape) & Outer Tape (Protection Tape) Wrapping

The steel pipe that is painted with primer is wrapping with tape by means of suitable devices or tools as per joint needs, and wraps the inner tape and then wraps the outer tape. Tape tensibility can be 10 to 20 N / cm. The overlapped length between beginning and end of an adhesive tape shall be no less than 1/4 circumference of the steel pipe and the total length of adhesive tape shall be no less than 100mm. each film shall be paralleled, and must not be twisted and rumpled.

3. QUALITY CONTROL QA/QC:

Mechanical Test> Plastic Test> Electric Test> Chemical Analysis> Heat Aging Test

4. CERTIFICATIONS:

ISO9001:2008

5. PACKAGING:

Covered Tape by Polyethylene sheet,and then loaded to carton.

5. TRANSPORTATION:

Logistic Department loading and transportation.

Packaging Detail:Covered Surface Protection Tape Butyl Rubber Adhesive for Underground Steel Pipeline Corrosion Protection by Polyethylene PE Release Liner and then loaded to carton....
Delivery Detail:45 days

Related Product for Surface Protection Tape Butyl Rubber Adhesive for Underground Steel Pipe Corrosion Protection