Single-pack Polymer Cement Waterproof Latex (E-901B) - E-901B

1.Waterproofing, moistureproofing and seepage prevention underground of roofs, kitchens and bathroom, 2.Free of poison&pullution - details see: https://www.buildingsupplieshub.com/single-pack-polymer-cement-waterproof-latex-e-901b-10100448
Type: Other Waterproofing MaterialsPlace of Origin: Guangdong China (Mainland)Brand Name: EloktModel Number: E-901B
Solid content: 70%Usage: underground of roofs, kitchens and bathrooms.Certificate: ISOApplication Method: Brush
Elongation at break: more than 80%Shelf Life: 12 monthsConsumption: 1kg/㎡ when the thickness of coating is 1 mmColor: White
Single-pack Polymer Cement Waterproof Latex (E-901B)
contact supplier for Single-pack Polymer Cement Waterproof Latex (E-901B)


Single-pack Polymer Cement Waterproof Latex (E-901B)

Features:

1.Composed of superior polymer waterproof latex which only for building and various auxiliaries.

2.After mixing with cement and applying on base surface, the latex can form a flexible waterproof course

3.It has excellent elasticity, adhesive stress, rupture strength, impermeability, crack resistance, weatherability, acid and alkali resistance.

4.Free of poison and pollution and easy to operate, which perfectly complies with the requirement for environmental protection.

Applicable Scopes:

Waterproofing, moistureproofing and seepage prevention underground of roofs, kitchens and bathrooms.

Implement standard: GB/T 23445-2009 (Type II)

NO.ITEMSTECHNICAL INDICES
1Solid content %≥70
2Tensile strength Mpa≥1.8
3Elongation at break %≥80
4Impermeability0.3Mpa, 30min impermeable
5Adhesive strength on moist base surface Mpa≥0.7
6Impermeability(back side of mortar) Mpa≥0.6

Operation Methods

1.Base surface treatment

*Keep it smooth, clean, firm, and without dust, water or oil stain.

*Where there is a flaw such as a honeycomb or crack must be repaired at first, and then internal an external corners should be made into circular arcs.

*The base surface that is too dry should be made wet by sprinkling water before operation.

2.Well-proportioned and non-granule mixture with an electric agitator. Use it up in 30 minutes after opening the package.

Formula for waterproof latex: Latex : cement = 1 : 0.8(wt.)

3.Latex application

*Apply the prepared waterproof latex evenly over the base surface.

*A second or third application is generally needed to reach the thickness required by the design. The time interval of each application is based on the last non-sticking coating, which is about 120 minutes (depending on weather).

*A next application must be done perpendicular to the former one.

*If inspection and acception is carried out by sprinkling or storing water, it must be done 7 days later after the coating is well cured.

*It is forbidden to spray the coating directly with pressure water.

4.Reinforcement

Use fiberglass cloth or non-woven fabrics for this part.

Cautions

*Add a certain amount of water to dilute the waterproof latex if it is too thick.

*Remaining procedures such as sticking facing tiles should be carried out 7-10days later after the coating is well cured.

*The cement must be common Portland cement above 32.5 (R).

*The waterproof latex will work better if it is shaked up before used. And it mustbe used up at one time, or it will fail to work.

*Referenced application amount: The referenced application amount of 1-mm-thickcoating is about 1.0kg/m2.

Packing / Storage

1.Packing: 25 Kg / barrel

2.It should be put in cool places.

3.Shelf life: 12 months.

Packaging Detail:25 Kg / barrel
Delivery Detail:10 days after receive the deposit

Related Product for Single-pack Polymer Cement Waterproof Latex (E-901B)