Instant Electric Heating Hot Water Faucet - ZH-A2

1.Which means that with 5 seconds fast heat., 2.adjust the water temperature 30-60 Degrees Celsius, hot and cold free switch. - details see: https://www.buildingsupplieshub.com/instant-electric-heating-hot-water-faucet-10002340
Type: Basin FaucetsPlace of Origin: Zhejiang China (Mainland)Brand Name: ZHENHAOModel Number: ZH-A2
Surface Finishing: ChromeFeature: Thermostatic Faucets,Electric FaucetsSurface Treatment: PolishedFaucet Mount: Single Hole
Installation Type: Wall MountedNumber of Handles: Single HandleStyle: TraditionalValve Core Material: Brass
Color: White   
Instant Electric Heating Hot Water Faucet
contact supplier for Instant Electric Heating Hot Water Faucet


The Instant Electric Hot Water Tap, ZHEN HAO, is designed especially for kitchen sinks and helps you to get hot water right at your sink without turning on the immersion.In recent independent trials carried out by ESB networks our EHT range were found to be 97% more efficient than using a 20 litre water heater.

Traditionally we all either turn on the immersion or the heating system to heat up water however doing this has three fundamental flaws.

1: It takes a long time for the water to heat up (generally about 30 minutes for a 55 litre immersion) and this can be particularly frustrating especially when you are in a hurry.

2: Very often we turn on the heating system or immersion and heat a full tank of hot water when we only need to use a few litres for washing dishes or cleaning vegetables when cooking. The rest of the heated water is adding unnecessarily to your energy bill.

3: Because the water has a long way to travel from the boiler to the tap a lot of cold water is often wasted whilst you wait for the hot water to come through to the basin. With water charges on the way we can’t afford to continue to do this

Typical Saving By Installing the Instant Electric Hot Water Tap

Using a quite conservative estimate the Instant Electric Hot Water Tap is 70% cheaper than using an immersion to heat water.

Taking approximate energy rates of about 0.19 per Kwh, it would cost around 0.65 cents every time you heat up a 55 litre immersion to 50 deg C and it will take 30 minutes or more for it to heat up.The amount of water wasted while waiting for hot water to come to the tap is not estimated here. It could be as much as 10 litres.

The Instant Electric Hot Water Tap takes around 5-10 seconds to heat the water.To heat water with the EHT to 50 deg C will take approx 50 seconds and to get 5 litres of water at that temperature will take approx 5 minutes. The cost of this is easily estimated. 5 minutes x 3Kwh x 19c per Kwh = 0.0475 cents. The amount of run off will be around 1/2 litre.

The estimated return on investment for this product is about 12 months for a typical family of four. When water rates are added to the calculation the return on investment should reduce significantly.

How to Use the Instant Electric Hot Water Tap

Once installed simply turn on the tap and get hot water.

Where can the Instant Electric Hot Water Tap be Installed?

It is ideally suited to either single or double basin sinks in the kitchen but can be fitted anywhere you need hot water once you have a water and electrical supply.

It is highly recommended that a qualified plumber is used to install the instant hot water tap which is in accordance with water and electrical regulations.

Certification and Product Specifications for Instant Hot Water Tap

CE Certified Product and manufactured under ISO 9001:2008
Electrical
Nominal Power Rating 240VMCB Protection Device
3KW16Amps
Electrical Supply13 Amp Three Pin Plug Or Fused Spur Outlet
Cable Entry PointPre Wired
Cable Size2.5mm²
Water
Inlet Connection15mm Flexi Hose
Water Entry PointsBottom
Minimum Running Pressure0.5 bar at 1l/min
Maximum Static Pressure4 bar
Notes on operation of tapThe EHT range is designed for conserving Water and Energy and has its flow limitations. The EHT is not designed for filling sinks and should be used with the water running for best results
Optimum Operating Flow Rate3 Litres Per Minute Tepid Water
Optimum operating Flow Rate1 Litre Per Minute at Hottest Point

Advantages:1. Save Power2. Water-saving3. Save time4. Security5. Durable6. Convenient and comfortable

Packaging Detail:one piece in a foam box,a foam box in a package boxes,several package boxes in an carton
Delivery Detail:20 days after samples confirmed

Related Product for Instant Electric Heating Hot Water Faucet