aac block light weight autoclaved aerated concrete blocks surat mumbai vadodara ahemedabad bharuch navsari - Infracrete

Size:

Length x Height = 600 x 200or 625 x 240 (mm)

Thickness (mm)= 50 75100150 200225300

Porous heat insulating lightweight blocks

Technical Parameter of AAC-Lightweight blocks & Its comparission with Red bricks

Parameter	Unit	Value
		Blocks	Brick
Size: length x height	mm	600x200 or 625x240	225x75
Size: thickness	mm	50, 75, 100, 150, 200, 225	105
Dry Density:	Kg/M3	550-650	1900-2000
Compressive Strength:	Kg/cm2	>3	>3
Thermal Conductivity	W/K0M	0.16 to 0.18	0.81 to 0.96
Size Variation	mm	+1 mm	+10 mm

§ Aluminum powder along with Fly ash, cement, lime, gypsum, surfactants in slurry form is mixed in high speed –Automatic batch mixer resulting in AAC slurry;

§ which is poured in to Mold.

§ Reaction of aluminum with lime, water, silica releases Hydrogen gas (H₂↑) when escapes from slurry, it rises to give porous structured to Calcium silica Hydrate (C-S-H, Concrete).

§ This risen mold is cut in to blocks of require size by wire cutting machine;

§ which are again steam cure under high temperature (180⁰C) and pressure (12 bars).

This gives High strength and precise sized but lightweight AAC blocks; are green building material perfect for wall of all kind.

Advantages of Anjali AAC blocks to House-Holder

Safety in Earthquake: ‘During Earthquake; Lightweight building is always more safe then heavy building’. SinceAnjali lightweight AAC blockReduces 60 % of dead weight of building; safety of building in earthquake increases.

Gives High Thermal Insulation:Because of Superior thermal insulation property of rating R30,Anjali AAC blocksdo not allow effect of outer heat/cold on interior of building. This saves A/C cost by more than 30%.

Allows No Water seepage: Due to lowest “Water absorptive material”/ “Volume of block” ratio (only 20% in block compare to 65 % in brick) and absence of capillaries (So No capillary action),Anjali AAC blocksdo not allow water seepage of from exterior to interior of wall.

No efflorescence:Due to seepage resistance as well Absence of any salty material in production of blocks there is no chance of efflorescence inAnjali AAC blockswall.

Pest resistance: Anjali AAC blocksare Pest resistance since humidity, nutritional material and such Environment required to grow mold, insect, pest is not available in it.

Fire resistance:AAC blocks falling into fire rating of 4 hrs makes it fire resistance wall material for building.

Advantages of Anjali AAC blocks to Builder

Ease of Working: Lifting, Drilling, cutting, chiseling, rasping are very easy and convenient with Anjali AAC blocks and can be done with conventional tools.

Faster Construction: Along with ease of working, accurate & bigger size of Anjali AAC block (more than 7 times) speed of construction of wall increases 2 to 3 fold.

Best finishing: Accurate size of Anjali AAC blocks brings better finishing of building without compromising on speed of construction

Carpet area: Wall made of Anjali AAC blocks having Accurate size & surface; can be finish with single coat plaster that saves ½” inch of space throughout length of wall, increases carpet area.

Saves steel & concrete: Lowest dry density (550-650 kg/M³) of Anjali AAC blocks reduces dead load by 50 % saves Steel and cement noticeably.

Cost effective:

Although Anjali AAC blocks is costlier than red bricks; Cost of wall per square feet of wall reduces since

Advantages of Anjali AAC blocks to Society

Saves Fertile Land:

Anjali AAC blocks uses fly ash wastage coming from thermal power don’t require fertile clay, Unlike red bricks manufacturing.

Recycling Fly ash waste:

After hydra power we are still largely depend on thermal power which has huge problem of fly ash waste being pile up in million tones. This is major raw material for Anjali AAC blocks.

Energy efficient As well Reduces Carbon Emission:

Anjali AAC blocks manufacturing is most energy efficient process compare to other walling material which again helps to reduce carbon emission.

Saves Fuel for Transportation:

Anjali AAC blocks Being lightweight more volume of walling material (almost 3 times) can be transfer in same carrier saves fuel for transportation by 66%.

Green Building Material:

Because of above social and environmental benefits it is material of choice for green building certifying organizations like LEED, IGBC, BREEAM, DGNB, CASBEE etc.

Availability: In

Gujarat:

Rajkot Bhavnagar Amreli Junagadh Jamnagar palanpur Himmat Nagar Patan Mehsana GandhinagarAhemedabad Sabarmati Maninagar Khambhat Nadiad Anand Vadodara Gorwa Makarpura Dahod Godhara Bharuch Ankleshwar Surat Varachha Adajan Dindoli Bhatar Bardoli Vyara Navsari Valsad Vapi Umbergaon Daman Silvassa Dahanu

Maharastra:

Mumbai Navi Mumbai Virar Thane Andheri Mulund Nashik Jalgaon Aurangabad

Rajasthan: Udaipur

Madhya Pradesh: Indore