mdf pvc door in china

How to Adjust Interior Doors

Instructions

1. Adjusting interior doors

   • 1

     Examine door hinges first. With frequent use, hinge-pins pull loose, and hinge-screws loosen. Before taking other action, hammer loosened pins in firmly and tighten any loose screws. This may be all you need to do. If the wood frame is old and the hinges no longer hold tight, remove the hinges from the door (first), mark the frame for new screw-holes and move hinges. Mark the door, same, drill new holes for hinges. Ask your helper to hold the door and rehang it. Sand and repaint/revarnish around old hinge marks. In a situation where the whole edge of the door next to the knob is the obstruction to closing, you can be fairly sure that the problem involves tightening the hinges.

   • 2

     Use your pencil to mark areas that stick or obstruct the closing on a door where the hinges seem secure. Both weather and the settling process that a house goes through with age can create places where the frame and the door no longer meet smoothly. Another villain is paint-accumulation -- even the best of thin, even coats pile up with years of repainting. Look at the door from both sides, determine exactly where the frame and door stick, and mark. (Looking at both sides of the door is likely to allow you to determine both the length and depth of the sticky spots.

   • 3

     Remove door from frame, leaving hinges in place on frame. Lay or prop door on work surface, and sand down small sticky areas. Larger areas may require planing; follow your pencil marks carefully to avoid removing more wood than you need to.

   • 4

     Get help, if possible, to test whether you have solved the sticking problem. There is, unfortunately, no way to do this except by trial and error, so be prepared to rehang the door (with at least one screw in each hinge to test) several times to test the new fit.

   • 5

     Repaint or refinish any areas you have sanded or planed bare. Changes in the moisture of the air can swell or shrink wood; refinishing is the best way to shield wood from strong responses to moisture changes

1) Our company's pictures:

2)PVC interior door's brief introduction:

New designs of PVC door,MDF door, interior door.

Brief introduction:

Material: MDF board, fir wood and PVC film

1. Top-quality doors at a reasonable price
2. Good selling network and complete service system
3. Standard dimensions:200*80*4cm,can be made as requested
4. No need to use lacquer and any surface treatment is not necessary
5. According to the local moisture degree , we dry all the wood to degrease
6. Integrates the door frame with the door leaf perfectly, convenient to install
7. Healthy product without radiant pollution,formaldehyde and toluene chemical
8. Moth proofing,moisture proofing, heat resistance, break resistance firmness and do not deform
9. Elegant taste, unique styles,and we also can product various design which the customers’ request

3)The advantages of the PVC MDF interior door:

4)Loading: