Elastomeric Foam Rubber Thermal Insulation Sheet - Class B1

Elastomeric Foam Rubber Thermal Insulation Sheet

HengBaoSheet and Roll Insulation is flexible elastomeric insulation foam. The expanded closed-cell structure makes it an efficient insulation.HengBaoproductshave an excellent water vapour diffusion resistance and temperature range from -50°C to 110°C.It is also effective for reducing HVAC noise.
In additionHengBaoInsulation is dust and fibre free. It will not emit any particles or fibres, even when cut into shapes and fittings

HengBaosheet Insulation is supplied in width 1m continuous rolls in nominal wall thicknesses from 1/4'' till 1-1/4'' (from 6 to 32 mm). Also it is available in width 1.2 m.

Hengbaoproducts are universally applicable for refrigeration, air-conditioning, sanitary, water-services as well as for central heating systems.

1.It is an elastomeric rubber based insulation material in the form of sheet and pipe with closed cell structure which doesn’t contain CFC halogen materials (chlorine, bromine, etc.) and PVC. It is manufactured to be used for air conditioning, heating and cooling systems.It has high thermal insulation value. It can be faced with aluminium foil and can be self-adhesive.

2. Application:

It is a black coloured elastomeric rubber based insulation material in the form of sheet and pipe with closed cell structure It is used on the exterior surfaces of the ducts and large diameter pipe lines in the heating, cooling and air conditioning systems for thermal insulation and condensation control purposes. It is developed to use at battleships, merchant ships, transportation systems; in areas where there are crowds of people such as business and entertainment places, hospitals, airports in order to reduce the emissions of smoke and poisonous gases. The sheets are adhered to the duct surface by using a special adhesive that Hengbao suggested. For the pipe applications, the pipe to be insulated and the rubber surface should fit properly and no gap should be left in between. Joints should be tightly sealed and they should be covered with insulation tape afterwards if necessary. Taping should not result in thickness loss. The application should be protected against distruption and rupture.