concrete block making machine - SF 1080 MCH

This machine is specially made with hopper with feeder and has the following functions:

The machine will work as:

First of all , we mix the raw material like cment, grid, sand and it will flow to the conveyor. Through the conveyor, it will come to the hopper and from the hopper, it will fill the the mould and functioning the push button initially, the vibrator will start setting the material properly and again the feeder will level up and then hydraulic will work 3 to 4 times and it will come to the down conveyor. When the down conveyor gear box starts working, the blocks will come to end of the down conveyor and then can take the block by hand or by forklift etc.

(Mixer machine 3 HP 17 ft Conveyor Gear Box attached 2 HP motor Hydraulic - 5 HP - 1440 RPM and 2 Nos . for Double Vibrator each 1.5 HP - 2880 RPM and 1 No. 1 HP for Gear Box Drive - 1440 RPM for down coveyor system total 14 HP)

Size of Mould Block per stoke/hr
400 x 200 x 100 mm 10 No. 600 Nos per hr. - 4800 per day of 8 hr
400 x 200 x 150 mm 06 No. 360 Nos per hr. - 2800 per day of 8 hr
400 x 200 x 100 mm 06 No. 360 Nos per hr. - 2880 per day of 8 hr

This machine can make normal wall blocks, either hollow or solid and also paver kerb stone fancy blocks etc etc...