Additives based adhesives for fixing tiles - SA812

- Water- and frost-resistant, - No additives required, - Easy application, - High stability, -For layer thicknesses of 3 to 5mm - details see:
Place of Origin: Shanghai China (Mainland)Brand Name: SAModel Number: SA812Usage: Joint Mortar
Type: Cement MortarQuality System Standard: ISO 9001:2008Material: Cement basedColor: Grey
Additives based adhesives for fixing tiles
contact supplier for Additives based adhesives for fixing tiles

SA - Specialize in Producing A Variety of Adhesive

Tiles are installed with mortar, which is basically a type of cement spread on the back of the tile or on the surface you are tiling. After all the tiles are set into the mortar and leveled out, the mortar must harden for at least 24hours.


· Weight: 25kg

· Standard: JG/T547 - 2005

· Shelf life: 6 - 8 months from production date

· Storage: unopened bag on plate in dry place

Field of Application

· Used to fix tiles with any water absorption

· Tiles fixed on external wall suggested size is less than 120cm2

· Tiles fixed on wall suggested weight is less than 20kg/cm2

· Fix tiles on internal or external walls and floors

Amount required

Typically one 25 kg bag will cover 4 - 5 square meters (5 ~6 kg/m2)

Technical Information


Data(Unit: MPa)

Tensile Adhesive Strength≥0.5
Tensile Adhesive Strength In Water≥0.5
Tensile Adhesive Strength after Heat Aging≥0.5
Tensile Adhesive Strength (open time, 20 mins)≥0.5
Tensile Adhesive Strength after Cycles

of Freeze - Thaw

Mix Ratio with water25kg / 5.75l
Pot lifeMin 3 hours
Open time20 minutes
Grouting after24 hours
Full Service48 hours
Temperature Resistance0°C-60°C
Resistance to DampGood
Tensile Adhesive Strength (28 days)( JC/T547-2005)>0.5 N/mm2

Substrate Preparation

1) Substrate should be flat ,hard, level, dry, and clean with normal absorption

2) Clean the surface until free of grease, dust or any stains

3) Old paint or plaster should be removed

4) Substrate been repaired should be preserved at least 48 hours

Application Enviroment

1) Ambient temperature: 5°C~35°C

2) Avoid application if too hot or freezing weather

3) Avoid application under direct sunlight and strong wind


1) May be sensitive to skin in case of contact.

2) Keep out of the reach of children

3) Avoid breathing the dust

4) In case of contact with eyes,rinse eyes immediately with plenty of water and consult a doctor

5) Wear suitable protective clothing,gloves and eye/face protection

Packaging Detail:25 kg paper sacks
Delivery Detail:3 days

Related Product for Additives based adhesives for fixing tiles